Can someone explain the quickest way to drain & replace the fluid in the green tube on this chassis? Looking from the top down on the tube, looks like the top plastic panel around the tubes comes off pretty easy, giving access to each tube. Would taking the four bolts out on the top (once un-hooked) let the tube be lifted out from the inside top? Never done any of the Philips yet. I have the Force manual on this, but no help on tube removal, or fluid replacment. Thanks for any help, or advice on this. Thanks. David. Have a great day and a Merry Christmas Robinson Electronics 1075 Sweeten Creek Road #51 Asheville, NC 28803-1757 Ph./Fax. 828 274-3787 Toll Free. 1-888 ROBELECT www.robinsonelectronics.com www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/