D1041 # MAZ22000A 20V 1 WATT ZENER PR1005 # UNH000600A CIRCUIT PROTECT Generic IC-PN30 or IC-PF38 1.5 amp After replacing these components measure resistance to ground from cathode of secondary diodes in power supply lowest reading is on +5 volt diode D1015 @ 580-1000 ohms OK others are over 2K ohms Apply full AC power and check operation DO NOT Test by starting at "O" volts and slowly increasing AC power This will cause D1041 to short as AC is increased from Zero to about 60 volts Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "John" <maintv2004@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 14, 2005 6:17 PM Subject: [TechAssist] Panasonic PV-D4744S, need part value > Hello. I am working on a Panasonic PV-D4744S VCR-DVD combo (no TV) made in 2004. I found D1041 shorted in the power supply. It looks like had been replaced before. It appears to be a zener, pehaps a crowbar for the PS but I am only guessing. Would someone have a SM they could send or at least the value of the zener. ALso has anyone seen this problem before? TIA, John. > John Mielke > Main TV > Longmont,Co > 303 776 6955 > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/