You are using the A version? STR* 58041. Right? I don't think the non A version will work at all in the G line models. The Old Master Technician ******************************** Since 1972 * Jim Myers * Telrad Electronics * Fort Wayne Indiana * ******************************** Tel-Tek Electronics wrote: > Been working on a dog here for the past 3 weeks. > I originally needed the microprocessor, which cured my first problem.Erratic > functions from the Tact switches. > Now I have a problem, when I turn it on, I hear the relay click, but no HV or > sound. > I suspected the Regulator, because if I put one lead from my meter on pin 2 > or 3 of the Regulator, the set would start up. and everything is fine. Till I > turn it off. Then same procedure. > > I installed a new Regulator..STR58041...with new Regulator I just get a high > pitch squeal, or whine. > > Any ideas from our Panasonic gurus. I have changed a couple of electrolytics > in the Regulator circuit, to no avail. > > TIA > > -Ed- > > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/