Ed, I had the same thing happen replacing a regulator on a Panasonic, using a generic WOULD NOT WORK.. Original Panasonic worked... Just a thought.. Bob. Bob's TV Worcester, ma woodman17@xxxxxxxxxxx ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 15, 2005 3:05 PM Subject: [TechAssist] Panasonic CT-36G33CW > Been working on a dog here for the past 3 weeks. > I originally needed the microprocessor, which cured my first problem.Erratic functions from the Tact switches. > Now I have a problem, when I turn it on, I hear the relay click, but no HV or sound. > I suspected the Regulator, because if I put one lead from my meter on pin 2 or 3 of the Regulator, the set would start up. and everything is fine. Till I turn it off. Then same procedure. > > I installed a new Regulator..STR58041...with new Regulator I just get a high pitch squeal, or whine. > > Any ideas from our Panasonic gurus. I have changed a couple of electrolytics in the Regulator circuit, to no avail. > > TIA > > -Ed- > > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/