[TechAssist] Re: PTK195 Bulletins

  • From: "Ed" <edb3@xxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Wed, 6 Nov 2002 15:27:18 -0700

ill take them.....
----- Original Message -----
From: <Excel1819@xxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, November 06, 2002 3:23 PM
Subject: [TechAssist] Re: PTK195 Bulletins


> The compressed file with all of the bulletins is almost 6 meg.  Reply back
if
> you can handle thaty size file and I will send it everyone
>
> Sincerely,
>
> Jason Martin
>
> Excel Distributing Inc.                      " The Best RCA / GE Parts
> 1819 Mentor Ave.                                  Distributor In The World
"
> Cincinnati, Ohio 45212
>
> 513-531-3989   800-733-3329 phone
> 513-531-4115   800-735-8007 fax
>
> Excel1819@xxxxxx
>
> www.ExcelDistributingInc.com
>
> <A
HREF="http://www.exceldistributinginc.com";>www.ExcelDistributingInc.com</A>
>
> ___________________________________________
>
> I'm a bulletin Fanatic,so the-more-the-merrier
>
> Peggs
>
> At 11:45 AM 11/6/02 EST, Excel1819@xxxxxx wrote:
> >Which bulletin you sending Jason?  It looks like a couple of them deal
with
> >the convergence.  I can send some along also if anyone else wants them.
> I'll
> >send all of the bulletins on this chassis or any other if you want, may
be a
> >big file though:)
> >
> >Sincerely,
> >
> >Jason Martin
> >
> >Excel Distributing Inc.                      " The Best RCA / GE Parts
> >1819 Mentor Ave.                                  Distributor In The
World "
> >Cincinnati, Ohio 45212
> >
> >513-531-3989   800-733-3329 phone
> >513-531-4115   800-735-8007 fax
> >
> >Excel1819@xxxxxx
> >
> >www.ExcelDistributingInc.com
> >
> ><A
> HREF="http://www.exceldistributinginc.com";>www.ExcelDistributingInc.com
> >
> >___________________________________________
> >
> >Sure Pegg, I'll send it to you. I don't have EVERYONES address but if
anyone
> >wants a copy I would be happy to send it to anyone who requests it. It is
in
> >PDF format and cannot be sent to the list.
> >
> >Jason Mouton
> >Mouton's Electronics
> >1116 Center St.
> >New Iberia, LA 70560
> >337-364-1641 Phone/Fax
> >moutons@xxxxxxxxxxxxxxxx
> >
> >
> >----- Original Message -----
> >From: "peggs" <peggs@xxxxxxxxxxxxxx>
> >To: <techassist@xxxxxxxxxxxxx>
> >Sent: Wednesday, November 06, 2002 9:56 AM
> >Subject: [TechAssist] Re: PTK195KB convergence off/not there
> >
> >
> >>
> >> send to all of us if possible
> >>
> >> Peggs
> >>
> >> At 09:28 AM 11/6/02 -0600, you wrote:
> >> >
> >> >Larry, there is a service bullitin on this chassis for the convergence
> >that
> >> >may apply to you. I will send it to your email.
> >> >
> >> >Jason Mouton
> >> >Mouton's Electronics
> >> >1116 Center St.
> >> >New Iberia, LA 70560
> >> >337-364-1641 Phone/Fax
> >> >moutons@xxxxxxxxxxxxxxxx
> >> >
> >> >
> >> >----- Original Message -----
> >> >From: "Larry E." <videotech@xxxxxxxxxxxx>
> >> >To: <techassist@xxxxxxxxxxxxx>
> >> >Sent: Wednesday, November 06, 2002 9:31 AM
> >> >Subject: [TechAssist] PTK195KB convergence off/not there
> >> >
> >> >
> >> >>
> >> >> Hi guys, RCA PTK195KB, convergence way off, picture has the usual
bow,
> >> >>   didn`t have schematic on the truck, set had 1.2 volts on positive
15v
> >> >> line, -2.2 on -15v line, 26v line is good. Pulled both 15v diodes
and
> >> >> they both checked good, pulled R19722 750K resistor it also reads
good.
> >> >> Tried to pull up crosshatch in customer menu and it will come up 1
time
> >> >> out of 10 try`s,when it did come up I tried to move the blue and the
> >set
> >> >> momentarily shuts down, when it comes up it`s out of the menu mode
> >> >> alltogether and then the convergence mode is no longer there. I shut
> >the
> >> >> set off for approx. 10 minutes to check components/solder on conv.
> >power
> >> >> board and when I powered the set back up the convergence was ok,
> >+15/-15
> >> >> were both there, 3-4 minutes later the convergence went back out and
> >> >> both 15v lines were gone again. No bad solder, no burnt parts,
> >heatsinks
> >> >> on convergence board are of course cold, all plugs plugged in. Going
> >> >> back this afternoon with schematic, anybody seen this problem ??
tia,
> >> >>
> >> >> --
> >> >> Larry Eastman
> >> >> American TV & Electronics
> >> >> Crystal River, Fl.
> >> >> http://www.tvjunkyard.com
> >
> >
> >
> >------------------------------------------
> >To REMOVE your email address, click here:
> >  http://www.tech-assist.org/unsubb.html
> >To CHANGE your email address, click here:
> >  http://www.techassist.net/forms/change.html
> >------------------------------------------
> >***NEW*** Tips Added Instantly!!!***
> >Submit Repair Tips here:
> >http://www.tech-assist.org/secure/tip/
> >
> Peggs' Electronics
> 1519 West 2nd Street
> Owensboro,KY 42301
> 270-926-4968
> fax 270-686-7399
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
>
>
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/


------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: