[TechAssist] Re: Nikko nvr 4500 model. (Cross to Goldstar number?)
- From: Gary McCartney <gary@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 24 Feb 2004 02:31:35 -0500
Bruce, I believe that to be a Goldstar D07 deck in that VCR. For REW
problems, I always replace the 333-208A lever you mentioned. Can't
remember if that lever affected FF or not. If you want the (usually)
blue cam gear, it is number 374-005A or Zenith number 928-00129. If you
want the metal arm gear that engages the supply and take up guides, it
is number 435-291A or Zenith 834-341. The metal gear near the mode
switch that meshes with the carriage basket assembly is 435-318A.
I don't have a cross for a Nikko NVR4500, but a Nikko NVR3500 is very
similar or possibly the same as a Goldstar R-G10M.
Gary McCartney
McCartney Electronics
Guelph Ontario Canada
Est. 1984
email: gary (at) number63.ca
Bruce Tiedeman wrote:
>
> Does any one on the list have a cross or information on this model. I am
> looking for the" gear", and "lever", location is at mode switch".This vcr
> has a FF&RW problem. I used to have these numbers at one time. The lever #
> 333-208A is one in question, I think. I don't know the matching gear number.
> thanks for any help,
> Bruce.
>
> B&T Electronics
> 139 Margaret St
> Sarnia Ontario
> Canada
> N7T 2Y3
> 519 344 1850
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
--
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
