Most of the units coming in for service need SSR0106KB001. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: "JOSE R. PANIAGUA" <breadywater@xxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Sunday, December 08, 2002 11:24 PM Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber and cross > hello: J Siverman > Can you please be so kind and at least give us the part # ,so if someone want to order he can do it with it. > Thank you. > Jose R. Paniagua. > Breadywater@xxxxxxx > > > ----- Original Message ----- > From: J Silverman > Sent: Sunday, December 08, 2002 1:20 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber and cross > > > Over here, the newer Funai mode switches cost about $1.50. We usually buy at > least 20 of a kind at a time directly from Funai Parts. At current shop > rates, $1.50 is equivalent to about 75 seconds of time, so it costs more to > repair than replace. However, a lot of them can be taken apart without > desoldering which saves about 30 seconds. Still cheaper to replace and far > less chance of having to do it all over again free. Also the newest switch > is so small and flimsy, if you even touch the fingers they just roll over > and die. > I do save lots of the old switches for the day when they may become NLA. > Jerry Silverman > Greentron Inc > 4 Newland Ave > Greenville SC 29609 > 864 232 3889 > Fax 271 2080 > mailto:greentron@xxxxxxx > ----- Original Message ----- > From: "Vilhelm Boor" <villyboor@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, December 08, 2002 8:32 AM > Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber > and cross > > > > > > Villy Boor > > --Boorelec Durban > > I think you will find that it is a problem with the surface of > the plastic, We have a series here where over the years I have gone from > advocating not to clean to cleaning them. This is my reason for using the > finest grade of steel wool to resurface metal and plastic. Then a good wash > in hot water and detergent to get impurities from all surfaces. Now wash > again with contact cleaner and lightly coat with a silicone lubricant. > Retention the fingers and its as good as new > > Villy Boor > > On Sat, 7 Dec 2002 08:49:13 > > Lyles Tv wrote: > > > > > >yes--replace the mode switch. I have repaired a lot of mode switches > over > > >the years, and the only ones I have had too replace in the past were in > > >really bad shape. These can look perfect, and fail. I don't know > > >why------yet > > >Jeff Farnsworth > > >Lyles TV and Appliance > > >17 S Washington St > > >Elkhorn, Wi. 53121 > > >ph 262-723-3477 > > >fax 262-723-3658 > > >tech@xxxxxxxxxxx > > >----- Original Message ----- > > >From: "Phil Bader" <philbad@xxxxxxxxxx> > > >To: <techassist@xxxxxxxxxxxxx> > > >Sent: Friday, December 06, 2002 1:58 PM > > >Subject: [TechAssist] Re: Mode switch for these combos fix and partnumber > > >and cross > > > > > > > > >> > > >> Sounds like you are saying the mode switches do fix these sets, but > must > > >> be replaced instead of cleaning them.Am I right??? > > >> Phil Bader > > >> > > >> peggs wrote: > > >> > > > >> > Belts > > >> > LED/Prism > > >> > are other common problems with these type units > > >> > > > >> > Peggs > > >> > > > >> > At 10:10 AM 12/6/02 -0600, Lyles Tv wrote: > > >> > >I have 3 combos in here right now. With the help of people here, I > > >found > > >> > that rebuilding/cleaning the mode switches like I have been doing for > > >> > years----don't work on these. I have trying to create a little > database > > >of > > >> > combo cross references as no one has been able to supply me with one. > > >The > > >> > three units I have here are > > >> > >Sylvania SSC092 > > >> > >Phillips CCB092 > > >> > >Symphonic WF-13C1 > > >> > >All 3 needed the same rotary switch. Part number 483527617343 > > >> > >Don't bother trying ness right now. I just ordered their last 2 in > > >stock, > > >> > just 2 minutes ago > > >> > >I do have some more in my cross, but it is not in a presentable > format > > >> > yet. When I can donate something usable, i will up load it. > > >> > > Btw, the generally common symptom with these were "stuck tape" > > >> > > > > >> > >Jeff Farnsworth > > >> > >Lyles TV and Appliance > > >> > >17 S Washington St > > >> > >Elkhorn, Wi. 53121 > > >> > >ph 262-723-3477 > > >> > >fax 262-723-3658 > > >> > >tech@xxxxxxxxxxx > > >> > >------------------------------------------ > > >> > >To REMOVE your email address, click here: > > >> > > http://www.tech-assist.org/unsubb.html > > >> > >To CHANGE your email address, click here: > > >> > > http://www.techassist.net/forms/change.html > > >> > >------------------------------------------ > > >> > >***NEW*** Tips Added Instantly!!!*** > > >> > >Submit Repair Tips here: > > >> > >http://www.tech-assist.org/secure/tip/ > > >> > > > > >> > Peggs' Electronics > > >> > 1519 West 2nd Street > > >> > Owensboro,KY 42301 > > >> > 270-926-4968 > > >> > fax 270-686-7399 > > >> > ------------------------------------------ > > >> > To REMOVE your email address, click here: > > >> > http://www.tech-assist.org/unsubb.html > > >> > To CHANGE your email address, click here: > > >> > http://www.techassist.net/forms/change.html > > >> > ------------------------------------------ > > >> > ***NEW*** Tips Added Instantly!!!*** > > >> > Submit Repair Tips here: > > >> > http://www.tech-assist.org/secure/tip/ > > >> > > >> -- > > >> Philip Bader > > >> Jan Phyl TV Inc. (estab. 1976) > > >> 3420 Recker Hwy. Winter Haven, Fl. 33880 > > >> Fax (863) 299-8821 > > >> email: philbad@xxxxxxxxxx > > >> > > >> ------------------------------------------ > > >> To REMOVE your email address, click here: > > >> http://www.tech-assist.org/unsubb.html > > >> To CHANGE your email address, click here: > > >> http://www.techassist.net/forms/change.html > > >> ------------------------------------------ > > >> ***NEW*** Tips Added Instantly!!!*** > > >> Submit Repair Tips here: > > >> http://www.tech-assist.org/secure/tip/ > > >> > > > > > >------------------------------------------ > > >Submit A Repair Tip For Everyone Here: > > >http://www.tech-assist.org/secure/tip/main.html > > >------------------------------------------ > > >To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > >To CHANGE your email address, click here: > > > http://www.techassist.net/forms/change.html > > > > > > > > > > > > _____________________________________________________________ > > Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. > > http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html