Thanks Bruce, but this one is different. It has 5 pin regulator and came in with STR53041 in it. Set is about 15 years old. Really too old but customer wanted to try and save and it does have pretty fair picture but does the blooming in and out now without regulator working. It was shorted. I figure Mitsubishi probably trashed their data and parts on this one long ago but may give them a try anyway. Thanks again. Dave Routson (Dave's TV) ----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, February 14, 2002 8:00 AM Subject: [TechAssist] Re: Mitsubishi CS3503R part ID please > > Dave I have a print for a CK 3500C Mitsubishi (partial print). Don't know > if it is the same. The regulator in this unit is a STR-S5141G. > Let me know if this is the same, can send you some information. > This set is around 10 years old. > > Bruce. > B&T Electronics. > > > ----- Original Message ----- > From: "Dave Routson" <davestv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, February 14, 2002 8:32 AM > Subject: [TechAssist] Mitsubishi CS3503R part ID please > > > > > > I am posting this again in case anyone > > has a schematic or parts list in your > > old data to confirm the regulator IC > > part number or get the orig. number. > > Or have any tip on the regulator circuit > > not working after replacing the reg. > > IC and control transistor. > > Thanks for any help. > > Dave Routson (Dave's TV) Cleburne,TX > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.