[TechAssist] Re: Mitsubishi CS3503R part ID please
- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 14 Feb 2002 11:04:23 -0500
Good luck,Dave these sets are hard to get data on. I had the customer
purchase the print and used it to fix his set.
Bruce.
----- Original Message -----
From: "Dave Routson" <davestv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 14, 2002 10:17 AM
Subject: [TechAssist] Re: Mitsubishi CS3503R part ID please
>
> Thanks Bruce, but this one is different.
> It has 5 pin regulator and came in with
> STR53041 in it. Set is about 15 years
> old. Really too old but customer wanted
> to try and save and it does have pretty
> fair picture but does the blooming in
> and out now without regulator working.
> It was shorted.
> I figure Mitsubishi probably trashed
> their data and parts on this one long
> ago but may give them a try anyway.
> Thanks again.
> Dave Routson (Dave's TV)
>
> ----- Original Message -----
> From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, February 14, 2002 8:00 AM
> Subject: [TechAssist] Re: Mitsubishi CS3503R part ID please
>
>
> >
> > Dave I have a print for a CK 3500C Mitsubishi (partial print). Don't
know
> > if it is the same. The regulator in this unit is a STR-S5141G.
> > Let me know if this is the same, can send you some information.
> > This set is around 10 years old.
> >
> > Bruce.
> > B&T Electronics.
> >
> >
> > ----- Original Message -----
> > From: "Dave Routson" <davestv@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Thursday, February 14, 2002 8:32 AM
> > Subject: [TechAssist] Mitsubishi CS3503R part ID please
> >
> >
> > >
> > > I am posting this again in case anyone
> > > has a schematic or parts list in your
> > > old data to confirm the regulator IC
> > > part number or get the orig. number.
> > > Or have any tip on the regulator circuit
> > > not working after replacing the reg.
> > > IC and control transistor.
> > > Thanks for any help.
> > > Dave Routson (Dave's TV) Cleburne,TX
> > >
> > > ------------------------------------------
> > > Make your TechAssist database better!
> > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
