OSD works and the auto-prgrammimng locks in channels but you can see what the picture is. It's a white screen with a hash pattern in it looks like the AFT won't lock in. I've replaced the tuner twice, the LA7674, the micro, saw filter, the video IF buffer and amp transistors, delay line and a few other mentioned components in the database. The AFT out on pin 47 of IC200 is 4.5 volts while the SAMS (3547) says it's supposed to be 0.1 volt. Pin 8 & 9 of the same IC states it should be 0.8 volts on both pins and they read 4.5 to 5 volts. Anybody had this or have any idea's? Phil@Phil's Electronics 34651 Ford Road Westland, MI. 48185 734-728-5925 philstv.com - philstv(at)aol.com ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/