I may have the convergence board for this unit look for part number on the board!! Adolph Gower Cordova TV 10275 Old Placerville Rd. Suite 5 Sacramento, Ca. ZIP 95827 E-mail agower@xxxxxxxxxxxxxxxxxx Phone (916) 363-6565 Fax (916) 363-7623 Phone (916) 363-6565 Fax (916) 363-7623 E-mail agower@xxxxxxxxxxxxxxxxxx Large assortment of used parts ----- Original Message ----- From: "Dan Garris" <dgarris@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: 2004Äê5ÔÂ11ÈÕ 18:16 Subject: [TechAssist] Mits VS-50VA1 Help!! > Hi Fellow Techs, > I'm working on Mitsubishi VS-50VA1 PTV (VZ-1 Chassis) which has a consistent > slight bow in the top & bottom of the picture (pincushion) and has a line > pulling up about 4" from bottom of picture intermittently this line will > appear and disappear, best way to describe line is like a vert retrace line > but a little different because it affects pincushion as it pulls up screen > intermittently about 4" from bottom. Even when line disappears the bow at > top/bottom is always there. I replaced both STK391-020 Convergence IC's and > checked all resistors related to IC's (none smoked - all ok) checked many > caps and reworked all CSJ's (Cold solder connections) I even checked C7001 > and C7036 on PIP module. Sometimes the entire picture will go out and come > back in. Set was moved from Texas to N. Carolina and customer stated problem > started after move. I'm lost on this set. I've checked my > WinsTips/ESD/Intrepid/TechAssist&archives/Goggle_search tips & more > databases, I'm stumped! Any Help!! > > Garris TV > New Bern, NC > Dan Garris KJ4FH > DGarris@xxxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/