[TechAssist] Re: Magnavox model TP2781 C101 chassis 27D700-7570 vert size
- From: <info@xxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 17 Mar 2002 01:45:23 -0600
The email address should be in members' signature files, that
keeps from having to ask. But, all you need to do (for any
email) is just click 'reply' or 'forward' then look at the
message body you'll see the sender's address in the header.
TechAssist Administration
http://tech-assist.org
info@xxxxxxxxxxxxxxx
techassist@xxxxxxxxxxxxx
----- Original Message -----
From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, March 16, 2002 9:08 AM
Subject: [TechAssist] Re: Magnavox model TP2781 C101 chassis
27D700-7570 vert size
Send me your email address and I'll send some information,
the procedure is
rather long and may be too mush to post on the list.
Jim Myers
Telrad Electronic Services Co.
Fort Wayne, IN 46815
jr.myers@xxxxxxxxxxx
260-432-4486 Fax and Voice
Fax is always on
----- Original Message -----
From: "GARY AND JUANITA CHAMBERS" <gchambe3@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 15, 2002 6:07 PM
Subject: [TechAssist] Magnavox model TP2781 C101 chassis
27D700-7570 vert
size
Set came in with bad flyback, replaced and now works good
except vertical
size is about 3/4" too big. This shows up when channel has
scrolling text at
bottom.
I looked for size adjust, must be only accessable thru eprom.
Does anyone have the codes to enter and the
setting(parameter/value) to
adjust this?
Also, I dont have the orig remote, but do have a universal
that seems to
work all but pip.
tried several sequences with no luck.
any help would be much appreciated,
Gary
CHAMBERS TV
BRADENTON,FL
SINCE 1982
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
