[TechAssist] Re: Magnavox model TP2781 C101 chassis 27D700-7570 vert size
- From: "Ken Dinckan" <kdinckan@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 15 Mar 2002 04:45:32 -0800
Did you check all the caps around vertical circiut??
Ken Dinckan
e-mail to : kdinckan@xxxxxxx
All Tv&Appliance Service
2747 Roosevelt Street # B
Carlsbad CA 92008
tel:(760)4341131
fax:(760)4348856
----- Original Message -----
From: "GARY AND JUANITA CHAMBERS" <gchambe3@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 15, 2002 3:07 PM
Subject: [TechAssist] Magnavox model TP2781 C101 chassis 27D700-7570 vert
size
> Set came in with bad flyback, replaced and now works good except vertical
size is about 3/4" too big. This shows up when channel has scrolling text at
bottom.
> I looked for size adjust, must be only accessable thru eprom.
> Does anyone have the codes to enter and the setting(parameter/value) to
adjust this?
> Also, I dont have the orig remote, but do have a universal that seems to
work all but pip.
> tried several sequences with no luck.
> any help would be much appreciated,
> Gary
> CHAMBERS TV
> BRADENTON,FL
> SINCE 1982
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
