[TechAssist] Magnavox RC5266PE02 Q's (Was: Need Help With Magnavox Television)
- From: t-warren@xxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 30 Jan 2002 09:15:33 -0700
Many thanks for all the responses to my previous post about this TV...
Turns out the anode cap wasn't properly sealed - cleaned cap/crt and
re-sealed cap - crt fires up now and works but am only getting snow,
volume still at full-blast and front panel controls still
nonresponsive... No weird noises though which is good in my book...
Again, for those who missed my previous post:
Manufacturer: Magnavox
Manufacture Date: January 1983
Model #: RC5266PE02 (floor console model)
Serial #: 24379034
Chassis #: 25C109-BA
What I need now is somebody with schematics for this old dinosaur...
Apparently, the high-voltage is fine as it fires up the crt but, I have
no idea what voltages to expect from the rest of the "Power Board" that
feeds the "Signal Board"...
The Power Board has a sticker with the following:
APW002B002
ASSEMBLY
248 2638G
The Signal Board has a sticker with the following:
AS?002C003 (The "?" could be a Q, C, G, O, or 0)
ASSEMBLY
249 2710G
Both the tuner and on-screen tuning modules plug onto the signal board
but, I'm not going to worry about them just yet...
The ground connections on the signal board are easy to spot but, I need
to know what voltages I should be getting at P1, P2, P7, P8, P10, P12,
P13, P14, P15, and P16S.
If, by any stroke of luck, anyone has this information, could you relay
it to me? It would be greatly appreciated...
Thanks!
Terry Warren
t-warren@xxxxxxxx
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
