Bad Eprom maybe? Ralph Dorsey Atlas TV Inc. 3945 s 76th St. Milwaukee.Wi 53220 414-545-2303 Jim Myers wrote: >That's the same information I have from Philips except for OB7 which is 000 >and the FMR remote has no settings in the instructions to set OB7 to >anything other than 000. Also note the new set which works has option bytes >of 000 215 129 162 164 088 000, the FMR will not set OB2 to 215, OB5 to 164 >or OB6 to 088. >Jim Myers >Telrad Electronic Services Co. >Fort Wayne, IN 46815 >jr.myers@xxxxxxxxxxx >260-432-4486 Fax and Voice >Fax is always on >----- Original Message ----- >From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Thursday, March 28, 2002 4:16 PM >Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis >option bytes > > > >lets try it again > >MS3250C121 > >00 >87 >129 >162 >196 >152 >64 > >MS3650c129 > >00 >87 >129 >162 >196 >24 >64 > >Phillip R Hull >phil245@xxxxxxxxxxxxx >----- Original Message ----- >From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Thursday, March 28, 2002 4:10 PM >Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis >option bytes > > >>Its in the Force 32 program if you loaded the manuals, >> >>MS3250C121 MS3650C129 >> >>OB1 00 OB1 >>00 >>OB2 87 OB2 >>87 >>OB3 129 OB3 >>129 >>OB4 162 OB4 >> >162 > >>OB5 196 OB5 >> >196 > >>OB6 152 OB6 >> >24 > >>OB7 64 OB7 >> >64 > >>Phillip R Hull >>phil245@xxxxxxxxxxxxx >>----- Original Message ----- >>From: "Jim Myers" <jr.myers@xxxxxxxxxxx> >>To: <techassist@xxxxxxxxxxxxx> >>Sent: Thursday, March 28, 2002 3:09 PM >>Subject: [TechAssist] Magnavox MS3650C129 & MS3250C121, M8 chassis option >>bytes >> >> >>>Hi all, I have two Magnavox sets, M8 chassis with same problem of the >>> >A/V > >>>input not working. I'm sure the problem is incorrect data in the option >>>bytes, I have the Factory Mode Remote and the instructions and have the >>>"correct" option byte data from Philips entered and saved. I also have a >>>third set, new just out of the box with no problems, same model and >>> >>chassis. >> >>>Checking the option bytes in the working new set I find the data is not >>> >>only >> >>>different but also not listed in the FMR instructions, no way to enter >>> >the > >>>data that is there. >>>Details, Model MS3650C129 option bytes in the set with the A/V problem >>> >is > >>>000 087 129 162 196 024 000 and is correct per Philips. >>>New set same model, A/V input works 000 215 129 162 164 088 000. The FMR >>>remote is not capable of entering this data. Philips does not have the >>>answer, does anyone here have it? This set does not have the SAM, CAM >>> >etc > >>>the only was to access service mode is with the FMR. >>>Thanks >>>Jim Myers >>>Telrad Electronic Services Co. >>>Fort Wayne, IN 46815 >>>jr.myers@xxxxxxxxxxx >>>260-432-4486 Fax and Voice >>>Fax is always on >>> >>>------------------------------------------ >>>Make your TechAssist database better! >>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>>------------------------------------------ >>>To UNSUBSCRIBE your email address, click here: >>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>Or send a BLANK email with unsubscribe in the >>>SUBJECT field to the address above. >>> >>> >>------------------------------------------ >>Make your TechAssist database better! >>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>------------------------------------------ >>To UNSUBSCRIBE your email address, click here: >>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>Or send a BLANK email with unsubscribe in the >>SUBJECT field to the address above. >> >> > >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > > >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > -- ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.