[TechAssist] Re: Magnavox FP4620W101 PTV705AH01 convergence menu
- From: "Joe Prokup" <pro501@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 15 May 2002 16:13:15 -0500
Leonard:
If the convergence mode is exited without storing it will be lost with AC
power cycling!
You have to press the "M" key when your done with adjusting
it should respond with calculating please wait.
Joe Prokup
PRO-ELECTRONICS
Spring Valley, IL
PH 815-663-3005 FAX 815-371-0190
pro501@xxxxxxxxxxxxx
----- Original Message -----
From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, May 15, 2002 3:13 PM
Subject: [TechAssist] Re: Magnavox FP4620W101 PTV705AH01 convergence menu
>
> Thanks Joe, Bob.
>
> I must have a problem with this one. I sent the convergence module to
> Tri-State because it was distorted and I could not adjust it at all. Now
I
> can adjust it but it will not hold memory. Is the memory for convergence
on
> this module? I suspect it is. Is there some mode in the service menus
that
> prevents saving the data? This set was apparently serviced by someone
else
> before I got it so I don't know what might have been done to it. Any
> suggestions would be appreciated before I send the module back to
Tri-State.
>
> Leonard G. Caillouet
> Service Manager
> Electronics World
> Gainesville, FL
> 352-332-5608
> 352-332-5668 (fax)
>
> ----- Original Message -----
> From: "Joe Prokup" <pro501@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, May 15, 2002 3:16 PM
> Subject: [TechAssist] Re: Magnavox FP4620W101 PTV705AH01 convergence menu
>
>
> >
> > Leonard:
> > Convergence touch-up mode 06-25-97 Menu
> > That should take you to the opening menu.
> > From there you can do green, red to green, blue to green,green to red,
or
> > green to blue.
> > If you do not have the template its best to just do the touch-up.
> > I have the Service Manual in the shop if you get lost.
> > Joe Prokup
> > PRO-ELECTRONICS
> > Spring Valley, IL
> > PH 815-663-3005 FAX 815-371-0190
> > pro501@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, May 15, 2002 11:50 AM
> > Subject: [TechAssist] Magnavox FP4620W101 PTV705AH01 convergence menu
> >
> >
> > >
> > > Could someone tell me how to access the convergence menu for this set.
> I
> > > can get into the service menu with 0,6,2,5,9,6,menu but there are no
> > dynamic
> > > convergence settings here, only static convergence.
> > >
> > > Leonard G. Caillouet
> > > Service Manager
> > > Electronics World
> > > Gainesville, FL
> > > 352-332-5608
> > > 352-332-5668 (fax)
> > >
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
