BTW, I re-routed the Black wire also. I run it under the small pcb, and solder it there(from the bottom). Also,I've done this repair in the past,and didn't notice that one having a Lower Audio Level on tuner than it does on the A/V inputs. Peggs At 01:27 PM 9/8/04, Eric Manuel wrote: >Robert check this out Eric >No or low sound from TV. A/V inputs OK. IC 7000 bad due to voltage >spike from CRT. Replace IC 7000 and move black wire (0227) away from CRT >and CRT DAG wire. > Eric Manuel > E M Electronics > Deer Lake Nfld > Canada > >BOSS1996@xxxxxxx wrote: > > > > Would anyone have a schematic for this model? > > Thanks > > > > Robert Cardoza > > Picture Perfect Electronics > > Pembroke Pines, Fla > > 954-435-5868 > > > > > ----------------------------------------------------------------------------- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/