How long does it take Ed? I couldn't figure it out either. I was guessing he replied to the wrong email. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "Edward Gaidies" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 08, 2004 10:06 AM Subject: [TechAssist] Re: KV32V68 Big Problem > When you get to know Doug a little better, you will.;-) > > > -Ed- > ***************************************************************** > Ed Gaidies=09 > Tel-Tek Electronics > Ontario-Canada > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx=09 > > On 8-Nov-04, at 9:04 AM, Barry Thompson wrote: > > > Doug: Could not understand your post. > > barrystv@xxxxxxx > > Barrys TV > > Ottawa Canada > > > > ----- Original Message ----- > > From: "Doug Keller" <dek@xxxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, November 08, 2004 7:31 AM > > Subject: [TechAssist] Re: KV32V68 Big Problem > > > > > >> He probably couldn't since Rehnquist is sick. > >> > >> Doug Keller > >> Wis-Kel Electronics > >> 101 Freeland Ave. > >> Terra Alta, WV > >> USA 26764 > >> dek@xxxxxxxxxxxxxx > >> dek@xxxxxxxxxxxxxxx > >> http://www.tech-assist.org > >> "Learn from the mistakes of others, because you > >> won't live long enough to make them all yourself" > >> > >> > >> > >> > >> > >> Gemini Computer & TV wrote: > >> > >>> Have you ruled out the yoke and the flyback? > >>> > >>> Bob Waterman, CET=AE #RI-28 > >>> Master Technician License #9109 > >>> Service Manager / Parts Manager > >>> Gemini Computer, TV, & Security Alarms > >>> (508)695-7302 > >>> (508)695-7769 FAX > >>> geminitv@xxxxxxxxxxx > >>> > >>> > >>> ----- Original Message ----- > >>> From: "Barry Thompson" <barrystv@xxxxxxx> > >>> To: <techassist@xxxxxxxxxxxxx> > >>> Sent: Friday, November 05, 2004 6:29 PM > >>> Subject: [TechAssist] KV32V68 Big Problem > >>> > >>> > >>> > >>> > >>>> Hi: All: This set keeps blowing hots regulators,resolder drive =20 > >>>> xformer > >>>> changed .47 cap. The waveform on the base of the looks good,but the > >>>> applitude only 35 volts pp with signal instead of 50.3 pp.The =20 > >>>> waveform on > >>>> the base and collector seem of the driver seem ok.The B+ is 135 =20 > >>>> volts and > >>>> clean. No shorts on secondary.Is 15 volts a normal variation? = > Thanks > >>>> Barry > >>>> . > >>>> barrystv@xxxxxxx > >>>> Barrys TV > >>>> Ottawa Canada > >>>> > >>>> > >>>> = > --------------------------------------------------------------------=20 > >>>> ------ > >>>> > >>>> > >>> --- > >>> > >>> > >>>> Lost Password: > >>>> http://www.tech-assist.org and select "Login Problems?". > >>>> Email Archives: > >>>> //www.freelists.org/archives/techassist/ > >>>> > >>>> > >>>> > >>> > >>> > >>> > >>> = > ---------------------------------------------------------------------=20 > >>> -------- > >>> Lost Password: > >>> http://www.tech-assist.org and select "Login Problems?". > >>> Email Archives: > >>> //www.freelists.org/archives/techassist/ > >>> > >>> > >>> > >>> > >>> > >> > >> = > ----------------------------------------------------------------------=20= > > >> ------- > >> Lost Password: > >> http://www.tech-assist.org and select "Login Problems?". > >> Email Archives: > >> //www.freelists.org/archives/techassist/ > > > > > > = > -----------------------------------------------------------------------=20 = > > > ------ > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/