The set does nothing, relay doesn't even click. Traced the turn on signal through switch and all looks good up to IC201. I changed it with a new one from JVC. I never get a turn on signal from it to the power on relay transistor. All of the supplies seem ok. HOT is ok, flyback I haven't rung out yet but will probably have to do that. I can jumper the turn on relay and the set comes up, with raster etc. no video on screen though. This makes me suspect that all the vertical and horizontal circuits are working ok though. That only leaves the video circuit and the tuner in this set. Any suggestions would be greatly appreciated!! I've been out of this business for about 8 years so I am rusty getting back into it. My other business has slowed way down with the economy, thus, doing consumer repairs once again. Thanks, Chuck Frequency Standards & Services 2727 E. Palmer Park, Ste. 100 Colorado Springs, CO. 80909-3032 719-228-0540 voice 719-228-9009 fax ----------------------------------------------------------------------------- Jokes, complaints, off topics, general chat. Everything other than repair help problems can be found at this new list. No archives and posts will not be found on Google or any other engine!To remove or join, email chat-request@xxxxxxxxxxxxxxx with remove or join as the subject. Send to the list at chat@xxxxxxxxxxxxxxx once subscribed. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/