Hi members, The blue convergence is off about 2 inches at the top left corner of the screen. All convergence adjustments work properly, but, have no effect in this area. I found some info in some e-mails I saved, saying that the DCU module might have bad fish-caps in it. I pulled the DCU module to the shop, where I examined it, and could not see any discolored, or any signs of leaking caps, or contamination. I hate to pull, and replace any of these caps, unless I am fairly sure that is where my problem is. I have not changed any of the 3 convergence ICs yet (STK4274), cause I would have to order some in first. What should I do first ? Change the convergence output ICs, or rebuild the DCU model ? There are about 20 fish caps on the module, and they are hard to remove without damage to the traces. This set is 9 years old. Any advice is appreciated. LLW LeRoy Westlund Westlund TV & Electronics 97 North Main " I forgot,..to remember,.. Centerfield, UT 84622-0087 to forget " Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/