Ed, what happens when you adjust the focus control? Maybe the resistor network in the flyback is bad. Gary McCartney McCartney Electronics 7134 Fife Rd, RR 7 Guelph Ontario Canada N1H 6J4 Fax: (519)821-1530 email: gary (at) number63.ca Tel-Tek Electronics wrote: > > Problem with retrace on this set. Have checked Cap in Sreen Circuit, and > it's OK. > Problem is when Screen Control is adjusted on Flyback, screen seems best > around Center of control, Have high retrace at each end of the control, > Center seems to be best, although still have retrace. Any suggestions. > > -Ed- > Ed Gaidies > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html -- ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html