Ed, Seems like you have lost the ground to the Potentiometer in the flyback. Ty Tiberius Kraemer Blue Star Electronics 3312 Silverton Rd. NE Salem, Oregon, 97303-2753 Phone: 503 391 1491 ty1K@xxxxxxxxx ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 08, 2003 9:21 AM Subject: [TechAssist] Hitachi G7NU > > Problem with retrace on this set. Have checked Cap in Sreen Circuit, and > it's OK. > Problem is when Screen Control is adjusted on Flyback, screen seems best > around Center of control, Have high retrace at each end of the control, > Center seems to be best, although still have retrace. Any suggestions. > > -Ed- > Ed Gaidies > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html