Roy, Did you replace any other components? Did you use a generic regulator? Components that should be replaced with this repair.. ICX3431 223-28 QX3401 121-1348 CX3416 100/25 replace with at least 50V CX3413 22/63 I would use OEM regulator, as its running all the time set is plugged in.. I have found with some generic regulators {SK} they will blow when first turned on..Serviced many of these sets Y Z A B lines and and only one bad fly and no picture tubes, and i'm sure some will dispute... Hope this helps Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: <Royal19960@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 31, 2003 11:47 AM Subject: [TechAssist] Help on Zenith Z32X31D > Hi all > Hope you all have a great new year. > I have problems with a Zenith Z32X31D tv. I have replaced the regulator 3 > times now. It works for anywhere from 2 days to a week and the regulatos goes > out. I'm not sure but I think it might do it on turn on. It seems that it will > work untill I shut it off for the night. When I come into the shop in the > morning it will be dead with a bad regulator. Any ideas? > Thanks in advance > Roy > Roy Adams > Bonded TV Service > 5158 W Forest Home Ave > Milwaukee, WI 53219 > 414-541-9111 > www.Bondedtv.com > we have thousands of tubes on the site > Webhosting from only 4.95 a month at Bondedhost.com > > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/