normal VCC for this ic is 24vdc.It is derived from the SMPS.On a similiar chass,check for 24vdc at D810,also from pin 9 on the TA8200 check for a 2.7Kohm=R242....hth..Don of HARTS-TVCR''ASC'' 9-Robert St.,Oromocto,NewBrunswick,CAN Tel#506-357-9785Fax#506-357-6010 ----- Original Message ----- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, January 08, 2002 12:58 PM Subject: [TechAssist] Goldstar CN-29C14 Chassis NC-27A > > Anybody have a schematic on this chassis. > I had to replace the audio output IC on this one. (IC902/TA8200AH) > I'm missing my supply on pin 9, which should be 37V. > Would someone have the resistor designation and value for the VCC to this > IC.Can't seem to follow the trace back, since it runs thru a cluster of > paint. > > TIA. > > teltek@xxxxxxxxxxx > TEL-TEK ELECTRONICS. > > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.