[TechAssist] Re: Go Video GV6060 Dust door won't open (Both Decks)
- From: "Jerome Silverman" <greentron@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 26 Feb 2005 22:43:01 -0500
On most vcrs, you have to hold the door in the open position while pushing
the front panel on, so that the opener levers will fall on the front side of
the door.
Jerry Silverman
Greentron Inc
4 Newland Ave Greenville SC 29609
Fax/Phone 864 232 3889
greentron@xxxxxxx
----- Original Message -----
From: "LeRoy Westlund" <llw@xxxxxxxxxx>
To: "TechAssist" <techassist@xxxxxxxxxxxxx>
Sent: Saturday, February 26, 2005 3:13 PM
Subject: [TechAssist] Go Video GV6060 Dust door won't open (Both Decks)
> Hi Members,
> I seen a fix for a weak tension spring problem, on this unit.
> The instructions are hard to follow.
> Can anyone explain a little better, how to fix the problem ?
> The springs look good, and seem to be in the proper position, but, the
dust
> doors just won't open upon eject, far enough for the cassette to come back
> out. As a result, I get an ERROR message. If I give the door a boost with
my
> finger, it will open, and work OK. Something is weak somewhere.
>
> Any help on this problem is appreciated.
> LLW
>
> LeRoy Westlund
> Westlund TV & Electronics
> 97 North Main " I forgot,..to remember,..
> Centerfield, UT 84622-0087 to forget "
> Ph./Fax 435-528-3822
> mailto:LLW@xxxxxxxxxx
>
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
