Of course telling her to replace it did not help...Easier to "bust" us family shop owners!After all we will work cheaper than their cost on shipping...It's only our time...;-) mark brock wrote: > > Ok I'm in trouble on this one, its a mother in law thing, and my rep is > on the line, I do very few monitors and rely heavily on tips for those. > this one was dead, repetitious chirp sound on and off heard from > flyback, replaced HOT that was shorted, everything else ohms ok, R731 and > 732 both ok, so where's the big bias R usually found off the output? and > or what else should I look for ? > D703 is one of those dual diode things with the anodes tied together ? > not sure how it should ohm but it does have diode action and on this one > both anodes are tied together ? I'm obviously lost here. any help would > be greatly appreciated, I told her that Gateway usually just replaces these > for a core charge ? didn't help, so I'll try here > thanks for all input. > brock > Brock Electronics > R.R.4 box 237 > Independence Ks. 67301 > 316-331-0235 > fax 331-7191 > brock@xxxxxxx > mailto:brock@xxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.