[TechAssist] Re: GE VG4054 VCR, FF and REV slow
- From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 21 Mar 2002 08:07:20 -0800
Hi Dave,
No FF/RW or sluggish FF/RW replace idler assembly. In fact, just order the
tune-up kit, which also includes belts and a pinch roller. You might also
check your brake band on the supply reel and clean the sensor underneath the
take-up reel. Oil, dust and deposits in the sensor can intermittently
contribute to the symptoms you're describing...
Kits for this are available at http://www.iglou.com/studiosound/
Hope this helps.
Bill
Premium Technologies
Ocean Park, WA. 98640
Phone: (360) 665-5984
Fax: (605) 253-4530
email: premtech@xxxxxxxxxxxxxx
----- Original Message -----
From: "David French" <PrecisionElectronics@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, March 21, 2002 10:34 AM
Subject: [TechAssist] GE VG4054 VCR, FF and REV slow
>
> VCR works fine except for FF and REV. The VCR will only FF with the pinch
> roller engaged. Unit pauses for 2-3 seconds (like it wants to change to
> faster speed), but then continues to FF or REV slowly with pinch roller
> pressure against the capstand. Anyone had this problem?
>
> Thanks for your help,
>
> Dave
> Precision Electronics
> 101 W 8th Ave.
> Johnson City, TN 37604
> PrecisionElectronics@xxxxxxx
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
