Yes. Also replace the three caps in the power supply reg. circuit (2.2uf at 100v, 15uf at 63v, and the 39 or 47uf 50v) they are next to the chip Maxwell Bailes Jr. wrote: >Sorry forgot to put the chassis# in there PTK169PVA >Max >--- "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> wrote: > >>Hello, >>This set shuts down in about ten minutes. Hit power >>buttons comes back on,but shuts down in ten minutes >>again.Has a perfect picture when on. Everything >>seems >>to check ok, could cr4118 be causing something like >>this? It can check good,but breakdown under load. >>Anyone had this problem before.Any help would be >>greatly appreciated. >>TIA >>Max >> > > >===== >Max Bailes >Bailes Electronics >Rt.4 Box57-A >Hurricane,WV. 25526 >304-562-7167 > >__________________________________________________ >Do You Yahoo!? >Make a great connection at Yahoo! Personals. >http://personals.yahoo.com >Help make your TechAssist online repair tips >database better! Submit your fixes here: >http://www.circuitwork.com/techassist/tip/#tips >To unsubscribe write to: >techassist-request@xxxxxxxxxxxxx >with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.