if your audio chip is bad,,it can cause a load on that circuit thereby shutting down the set "Maxwell Bailes Jr." wrote: > Hello, > I changed CR4118,CR4401,CR4402,c4145,2.2uf 100V.,15uf > 63V,47uf 50V. Checked C4401,C4402 they checked good. > The set still goes into shutdown after a few minutes. > The voltage at the cath. of CR4118 is 15V. til > shutdown,then it goes to 7 to 9V. Same problem as > before. Makes a loud pop through audio,when it > shutsdown. Any help would be greatly appreciated. > TIA > Max > --- Shoreline Electronics <jstielau@xxxxxxxx> wrote: > > > > You bet ! Change that diode (ECG580 or Equiv) also > > change the 2.2uf & 15uf & > > 47uf cap in the primary of the SMPS. > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beechtree Lane > > Westbrook,CT 06498 > > 860-399-1861 Voice > > 860-664-3535 Fax > > jstielau@xxxxxxxx > > > > ----- Original Message ----- > > From: "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> > > To: "techassit" <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, October 30, 2001 11:10 PM > > Subject: [TechAssist] GE PTV Model#46GW940 shuts > > down in 10 minutes > > > > > > > > > > Sorry forgot to put the chassis# in there > > PTK169PVA > > > Max > > > --- "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> > > wrote: > > > > Hello, > > > > This set shuts down in about ten minutes. Hit > > power > > > > buttons comes back on,but shuts down in ten > > minutes > > > > again.Has a perfect picture when on. Everything > > > > seems > > > > to check ok, could cr4118 be causing something > > like > > > > this? It can check good,but breakdown under > > load. > > > > Anyone had this problem before.Any help would be > > > > greatly appreciated. > > > > TIA > > > > Max > > > > > > > > > ===== > > > Max Bailes > > > Bailes Electronics > > > Rt.4 Box57-A > > > Hurricane,WV. 25526 > > > 304-562-7167 > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Make a great connection at Yahoo! Personals. > > > http://personals.yahoo.com > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > ===== > Max Bailes > Bailes Electronics > Rt.4 Box57-A > Hurricane,WV. 25526 > 304-562-7167 > > __________________________________________________ > Do You Yahoo!? > Find a job, post your resume. > http://careers.yahoo.com > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.