[TechAssist] Re: GE 19TVR60 TV/VCR,TVR2/2A, dead, 6 years old

From: joel e sanford <jo-rope@xxxxxxxx>
To: techassist@xxxxxxxxxxxxx
Date: Thu, 27 Nov 2003 08:16:58 -0600

Batman
Magnavox Combo Fix
Fri Nov 21 2003 3:19:12 pm
67.73.136.171
Model # MC194DMG01...manufactured Jan 03.
The set would shutdown within 5 or 6 seconds, not enough time for a
picture to show.
Found the 12v stand-by was being pulled down to 3 volts or so.
Solution: The capstan motor was bad.
You can disconnect the ribbon connector for the motor and now the set
will come and play for about 15 to 20 seconds.
The service manual doesn't show anything on the motor drive circuit
board, so I really don't know if it was the motor or the drive circuit.
Part # 4835-362-17044 complete 





Batman I had one about 3 months ago, shoulda ask me (nm) ? ~~~^LSL^~~~,
Fri Nov 21 3:32pm 
I did post it.... (nm) ? Batman, Fri Nov 21 4:47pm 
Just pulling your leg. Thanks for the info (nm) ? ~~~^LSL^~~~, Fri Nov 21
4:57pm 
LSL ? Batman, Fri Nov 21 5:02pm 
U got me good.. (nm) ? ~~~^LSL^~~~, Fri Nov 21 5:03pm 
 
Click here to receive daily updates




On Wed, 26 Nov 2003 23:01:53 -0500 <support@xxxxxxxxxxxxxxxxxx> writes:
> Kevin,
> First thing to check:
> From Tech Repair CD;
> GEN ELECTRIC\19TVR60\GOES DEAD IN 5 SECS.\\\\MODE SWITCH- CHECK 
> ALIGNMENT- CHECK PINCH ROLLER
> PLACEMENT\\\\\\\\\
> Another common problem is shorted motor driver IC.
> 
> Jeff Dougherty
> Intrepid Video TV/VCR
> 263 S Front St
> Steelton PA 17113
> fax...717-564-4952
> www.intrepid-video.com www.tech-repair.net
> 
> ----- Original Message -----
> From: "Kevin" <kevintv@xxxxxxx>
> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, November 26, 2003 3:44 AM
> Subject: [TechAssist] GE 19TVR60 TV/VCR,TVR2/2A, dead, 6 years old
> 
> 
> Customer said that set went dead as the set was on.  No tape was in 
> the
> VCR.  When first powered up, relay clicks on and off, HV for a split
> second.  Set then goes into shutdown.  B+ is 119.4 volts before 
> power
> button is pressed, after power button is pressed, B+ drops to 2 
> volts as
> set goes into shutdown.  Could not find any shorts or open 
> resistors.
> All caps checked good for ESR.  TIA
> 
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx
> 
> 
> 
>
*************************************************************************
****
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
> 
> 
> 
>
*************************************************************************
****
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
> 
> 


joel sanford
dba/speedy electronics
ph/fax 773 264 2173
chicago ills

*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

[TechAssist] Re: GE 19TVR60 TV/VCR,TVR2/2A, dead, 6 years old

Other related posts: