Kevin, First thing to check: From Tech Repair CD; GEN ELECTRIC\19TVR60\GOES DEAD IN 5 SECS.\\\\MODE SWITCH- CHECK ALIGNMENT- CHECK PINCH ROLLER PLACEMENT\\\\\\\\\ Another common problem is shorted motor driver IC. Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 26, 2003 3:44 AM Subject: [TechAssist] GE 19TVR60 TV/VCR,TVR2/2A, dead, 6 years old Customer said that set went dead as the set was on. No tape was in the VCR. When first powered up, relay clicks on and off, HV for a split second. Set then goes into shutdown. B+ is 119.4 volts before power button is pressed, after power button is pressed, B+ drops to 2 volts as set goes into shutdown. Could not find any shorts or open resistors. All caps checked good for ESR. TIA Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/