Oops, I reset it after I opened window, should be ok this time. George Afana Electronics Moreno Valley, CA ----- Original Message ----- From: "Dan Garris" <dgarris@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 03, 2005 8:19 PM Subject: [TechAssist] Re: F8 Chassis Dead - Relay clicks 5 times? > Also I replaced the Yoke, and I tried turning down the Screen voltage > some... Still same problem. > > Garris TV > Dan Garris > New Bern, NC > dgarris@xxxxxxxxxxx > > *************** >> >>I Removed CRT board from pic tube, checked 1572, 1573 Pico fuses are OK, >>zener >>diodes 6510 & 6514 are ok, diode 6460 is ok, 2508 Main Filter Cap 470/200v >>is ok, Leads are ok and NOT broken on the 7460 H.O.T., Checked HOT out of >>circuit against a good one and was ok, Checked C2409 out of circuit and >>was >>OK, Replaced Vertical output again with another new STV9379FA just in case >>I >>had a bad new one in my stock, double checked for csj's and any cracks in >>pcb, randomly checked all diodes and lo ohm resistors, (looking more like >>the IHVT) still have same problem... Set will make first relay click pause >>and click rapidly anywhere from 4 to 7 times (average about 5 times). >>(dead >>set) Anyone ran into this on the F8 NAP Chassis? >> >>Garris Radio & TV >>Dan Garris >>New Bern, NC >>dgarris@xxxxxxxxxxx >> >> >> >From: "Dan Garris" <dgarris@xxxxxxxxxxx> >> >Reply-To: techassist@xxxxxxxxxxxxx >> >To: techassist@xxxxxxxxxxxxx >> >Subject: [TechAssist] F8 Chassis Dead - Relay clicks 5 times? >> >Date: Mon, 03 Jan 2005 20:13:51 -0500 >> > >> >What: 27" Color TV >> >Make: Magnavox >> >Model: MS2730 C221 >> >Chassis: 27F800-7583 >> >Made: March 2002 >> > >> >Problem: When you hit the Power button on front, the relay "clicks" >> >once >> >then "clicks" FIVE times and quits. The Front LED lights "once" with the >> >first relay click, then goes out, then lights once more again while the >> >relay clicks five times quickly, then goes out for good. High voltage is >> >not >> >coming on. >> > >> >I replaced the STV9379FA Vertical output IC and checked R3488, R3486, >> >R3487, >> >R3491, R3492, all diodes in the area, checked all pico fuses, checked >> >for >> >cracks on the pcb and bad solder, replaced the common R3340 on the CRT >> >board. This is sounded like the flyback. Anyone experiencing this >> >before? >> > >> >Garris Radio & TV >> >Dan Garris >> >New Bern, NC >> >dgarris@xxxxxxxxxxx >> > >> > >> > >> >----------------------------------------------------------------------------- >> >Lost Password: >> >http://www.tech-assist.org and select "Login Problems?". >> >Email Archives: >> >//www.freelists.org/archives/techassist/ >> >> >> >>----------------------------------------------------------------------------- >>Lost Password: >>http://www.tech-assist.org and select "Login Problems?". >>Email Archives: >>//www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.6.8 - Release Date: 1/3/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.8 - Release Date: 1/3/2005 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/