Believe you must have EMERSON Remote Adolph Gower Cordova TV 10275 Old Placerville Rd. #5 Sacramento, Ca. 95827-3044 Phone (916) 363-6565 Fax (916)363-7623 Email:dolph1133@xxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Ed Gaidies Sent: Monday, January 06, 2003 7:56 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Emerson TV mocel TC2551RD, channel display won't go away Gary; Nor sure about the Emerson, unless they are using a Magnasonic Chip. With the Magnasonic, the OSD can not be extinguished until the autoprogramming is done. Usually goes to the Large Green CH Number..then goes to the smaller Red Ch Number right in the middle of the screen. If this is the one that changes from a Green (large) number to a Red (small) number..the only way to get rid of it..is with the original Remote...which are about $56 ...your cost. -Ed- Tel-Tek Electronics Ontario-Canada "If Apple and Microsoft can talk...why can't the rest of the World?" teltek2@xxxxxxxxxxxx ----- Original Message ----- From: "Gary McCartney" <gary@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 06, 2003 10:35 AM Subject: [TechAssist] Emerson TV mocel TC2551RD, channel display won't go away > > I have a customer who called me this morning, saying that a while back, > I used a universal remote to clear their TV's on-screen channel display > (they lost their original remote). Then they took the set home and 2 > days later the display was back on screen and they haven't been able to > clear it again, with trying a number of different universal remotes. > > They haven't brought the set back to me, but I am assuming they probably > hit a button on their universal remote which brought up the display and > now they can't figure out how to get rid of it. My question is, is there > any known faults with this model concerning the on screen display which > would help me deal with this TV? The customer wants me to find them an > original remote but I said that if I was able to clear the display with > a universal, that I didn't think an original remote would do any > different at keeping the display from popping back up. The only > advantage I can see with an original would be a dedicated, labelled > "DISPLAY" button which might be easier for the customer to reset the > display with. > > Who is the Emerson parts distributor in Canada in cae I need to try and > obtain a remote? > > > > Thanks for any help. > -- > > > > > Gary McCartney > > McCartney Electronics > 7134 Fife Rd, RR 7 > Guelph Ontario Canada N1H 6J4 > Fax: (519)821-1530 > email: gary (at) number63.ca > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html