[TechAssist] Re: Emerson TC2555D
- From: "Tech Repair CD support" <support@xxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 17 Jun 2002 16:54:47 -0400
I meant to say regulator, not conv chips...replying to too many posts.
My point was, you save us a lot of time if you post what you checked and
replaced
in your first post.
Jeff
FAX 717-564-4952
Intrepid Video & Electronics
501 Luther Rd
Harrisburg PA 17111-2055
Be careful of your thoughts.
They may become your words any moment.
Order your tip CD today. Filled with TV, VCR, camcorder tips and more.
Version 3.0, ready, with more tips, user friendly program.
$49.00 for CD, plus first year of tip updates.
sales@xxxxxxxxxxxxxxx for more info
www.tech-repair.net www.intrepid-video.com
www.thetoolcaddy.com www.9-11-2001tragedy.com
----- Original Message -----
From: "Shaun" <ssroark@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, June 17, 2002 12:09 AM
Subject: [TechAssist] Re: Emerson TC2555D
> Jeff, I am not trying to argue with you but this set doesn't have any
> convergence chips. I have replaced the regulator, horz output and 4.7 ohm
> resistor off pin 2 of the regulator. I have also checked or replaced all
> the parts listed in your first post. Sorry for not stating that clearly in
> my first post my bad, but no matter what I do the regulator is the problem.
> I need an original from either Emerson or from an Emerson chassis tv. I also
> tried on of the original regulators (STR30110) I ordered from Fox
> Int.(Emerson) which they said was made by Orion, in the other tv that works
> fine and the new regulator doesn't work in that tv either. There is no
> control voltage on pin 5 (7 volts) but the original regulator that was in
> the tv works fine in both tv's.
> Shaun
> Advanced Electronics
> Fort Morgan, CO 80701
> (970)867-3124
> ssroark@xxxxxxxx
> ----- Original Message -----
> From: "Tech Repair CD support" <support@xxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, June 16, 2002 6:53 PM
> Subject: [TechAssist] Re: Emerson TC2555D
>
>
> >
> > Shaun,
> > Your posts did not state you replaced, or checked all these parts, only
> that you
> > replaced the convergence chips several times.
> > I suggest if you use new conv chips, replace the parts listed with new
> parts.
> > I have never seen your problem, but it is possible one of the caps to have
> high
> > ESR, or one of the other parts have failed.
> > Why the used reg works, could be a mystery.
> > Jeff
> > FAX 717-564-4952
> > Intrepid Video & Electronics
> > 501 Luther Rd
> > Harrisburg PA 17111-2055
> > Be careful of your thoughts.
> > They may become your words any moment.
> > Order your tip CD today. Filled with TV, VCR, camcorder tips and more.
> > Version 3.0, ready, with more tips, user friendly program.
> > $49.00 for CD, plus first year of tip updates.
> > sales@xxxxxxxxxxxxxxx for more info
> > www.tech-repair.net www.intrepid-video.com
> > www.thetoolcaddy.com www.9-11-2001tragedy.com
> > ----- Original Message -----
> > From: "Shaun" <ssroark@xxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Saturday, June 15, 2002 12:16 PM
> > Subject: [TechAssist] Re: Emerson TC2555D
> >
> >
> > > Thanks for the reply Jeff, but in my post I have already replaced these
> > > parts or checked them all. The problem again is with the STR30110. None
> of
> > > the replacements work.
> > >
> > > Shaun
> > > Advanced Electronics
> > > Fort Morgan, CO 80701
> > > (970)867-3124
> > > ssroark@xxxxxxxx
> > > ----- Original Message -----
> > > From: "Tech Repair CD support" <support@xxxxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, June 15, 2002 6:24 AM
> > > Subject: [TechAssist] Re: Emerson TC2555D
> > >
> > >
> > > >
> > > > Shaun,
> > > > Check all of these:
> > > > /EMERSON/TC2555DA/DEAD EXCEPT CLICKS////Q401(2SD1556)*R521(4.7ohm
> > > > 2w)*IC501(STR30110)*C435(1uf/160v)*R507(47ohm 14w)*also check C507
> (100uf
> > > > 160v)/////
> > > > Jeff
> > > > FAX 717-564-4952
> > > > Intrepid Video & Electronics
> > > > 501 Luther Rd
> > > > Harrisburg PA 17111-2055
> > > > Be careful of your thoughts.
> > > > They may become your words any moment.
> > > > Order your tip CD today. Filled with TV, VCR, camcorder tips and more.
> > > > Version 3.0, ready, with more tips, user friendly program.
> > > > $49.00 for CD, plus first year of tip updates.
> > > > sales@xxxxxxxxxxxxxxx for more info
> > > > www.tech-repair.net www.intrepid-video.com
> > > > www.thetoolcaddy.com www.9-11-2001tragedy.com
> > > > ----- Original Message -----
> > > > From: "Shaun" <ssroark@xxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Saturday, June 15, 2002 1:27 AM
> > > > Subject: [TechAssist] Re: Emerson TC2555D
> > > >
> > > >
> > > > > OK I have tried everything. I have ordered the STR30110 regulator
> from 2
> > > > > parts houses and when they didn't work I ordered the original from
> > > Emerson
> > > > > who told me the set was made by Orion and sent me an original Orion
> > > > > regulator(STR30110). None of them work there is no control on pin 5
> > > (should
> > > > > be 7 volts dc). I took one out of a good working Emerson tv with the
> > > same
> > > > > regulator(STR30110) and the set worked fine (7 volts on pin 5) has
> > > anyone
> > > > > seen this problem.
> > > > >
> > > > > Shaun (confused in Colorado)
> > > > > Advanced Electronics
> > > > > Fort Morgan, CO 80701
> > > > > (970)867-3124
> > > > > ssroark@xxxxxxxx
> > > > > ----- Original Message -----
> > > > > From: "Shaun" <ssroark@xxxxxxxx>
> > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > Sent: Wednesday, June 05, 2002 7:57 PM
> > > > > Subject: [TechAssist] Emerson TC2555D
> > > > >
> > > > >
> > > > > >
> > > > > > This set came in with horz output shorted along with the regulator
> and
> > > > > > resistor 521 (4.7 ohm 3 watt ) open. Also the 47 ohm off pin 2 of
> the
> > > > > > regulator was open. After replacing all the bad parts the set runs
> but
> > > the
> > > > > > B+ from pin 4 of the regulator is 111 volts dc and the picture is
> > > pulled
> > > > > in
> > > > > > just a little on the sides. When I adjust the B+ pot nothing
> changes,
> > > but
> > > > > it
> > > > > > is good and so is the resistor in line with it and pin 5 of the
> > > regulator.
> > > > > > My schematic says that pin 5 of the regulator should have 7 volts
> dc
> > > on it
> > > > > > but there is only 0.07 volts there and it doesn't change when
> > > adjusting
> > > > > the
> > > > > > B+ pot. Any ideas?
> > > > > >
> > > > > > Shaun
> > > > > > Advanced Electronics
> > > > > > Fort Morgan, CO 80701
> > > > > > (970)867-3124
> > > > > > ssroark@xxxxxxxx
> > > > > >
> > > > > > ------------------------------------------
> > > > > > To REMOVE your email address, click here:
> > > > > > http://www.tech-assist.org/unsubb.html
> > > > > > To CHANGE your email address, click here:
> > > > > > http://www.tech-assist.org/change.html
> > > > > > ------------------------------------------
> > > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > > Submit Repair Tips here:
> > > > > > http://www.tech-assist.org/secure/tip/
> > > > >
> > > > >
> > > > > ------------------------------------------
> > > > > To REMOVE your email address, click here:
> > > > > http://www.tech-assist.org/unsubb.html
> > > > > To CHANGE your email address, click here:
> > > > > http://www.tech-assist.org/change.html
> > > > > ------------------------------------------
> > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > Submit Repair Tips here:
> > > > > http://www.tech-assist.org/secure/tip/
> > > > >
> > > >
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.tech-assist.org/change.html
> > > > ------------------------------------------
> > > > ***NEW*** Tips Added Instantly!!!***
> > > > Submit Repair Tips here:
> > > > http://www.tech-assist.org/secure/tip/
> > >
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.tech-assist.org/change.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> > >
> > >
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.tech-assist.org/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
