replace c613 and c626 on input pins 3 of both audio ic"c from daewoo hth Robert tvservice@xxxxxxxxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "T/A list" <techassist@xxxxxxxxxxxxx> Sent: Monday, November 11, 2002 12:14 PM Subject: [TechAssist] Daewoo, DTQ25S2FC, sound distorts after an hour or two > > I recently signed up as an ASC for Daewoo so I posted this problem on their > web site Q&A section, also called and left message twice......it's been over > a week and no help from them! > The sound will get distorted after a long warm-up of an hour or more and > then gets so weak there is almost no sound. The set uses two KA2201 IC's to > drive the two speakers. The following is what I posted on their web site: > > "IC's 602, 603 and 604 have been replaced and problem remains, After set is > on for about an hour the audio becomes distorted then drops out completely. > Probing IC 603 or 604 pin 3 with a scope there is a DC voltage of around 4 > to 5 volts that starts counting down, or discharging, when this voltage > drops to around 2 volts the audio comes on. > > Is there a fix for this problem?" > > I have found that a 2.2K resistor added from pin 3 to ground keeps this > voltage from charging and fixes the problem while having very little effect > on the volume level. > Has anyone had this problem and found a fix or an authorized modification? > Thanks for any help or suggestions, > > Jim Myers > Since 1972 > Telrad Electronic Services Co. > Fort Wayne, IN 46815 > jr.myers@xxxxxxxxxxx > 260-432-4486 Fax and Voice > Fax is always on > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/