and we used to catch heck for "shotgunning" a circuit!rotfl!Why not just issue a circuit rework kit, and admit they screwed up?lol apprecite the tip, Sterling. al alleathe@xxxxxxxxxxxxx Al Leatherman Mine Hill, NJ 07803 973-361-5796 WWW.ALS-TV.NET ----- Original Message ----- From: "sterling pasher" <spasher@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, May 11, 2002 9:09 AM Subject: [TechAssist] Re: DTQ-26S1FC : Fix for Therminal Runaway > > > > > > Here is the list of things that Daewoo told me to replace or test when > there is thermal runaway in horz out. > They say that this is good for shutdown after it has been on for awhile. > > Original Replace > Q402- 2SD1880 2SD2539> > Q803- KSC2509B 2SC2355 or NTE2363 > Q804- KSE!#13009 2SC3890 or NTE379 > Q805- Ktc3203 2SC2235 or NTE2382 > Replace : C808, C404 , C410 , C414 , C413 > Check : C412 , C401 Replace if necessary. > Change C505 to 1000pf@100v , R420 to 1.8K 1 watt > Check or replace R516 10K pot (which will cause pic to narrow on right) > > Buck Pasher > Bucks TV > Gander NF > spasher@xxxxxxxxxxxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/