If this is the convergence board with the metal posts stuck thru both sides of the board, solder them all, both sides. It can cause the red/blue to misalign and also cause the fuse to blow. Damon Brunger Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Corey Brazell" <cohbraz@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, May 16, 2003 1:49 PM Subject: [TechAssist] Crosley (Philips) CP4690 PTV420 Convergence Problem > > I am working on this Philips made Crosley PTV, model CP4690, chassis PTV420. > They blue and red convergence was wrong, and would not adjust through the > customer menu. The picture was also wider than it should be. I pulled the > convergence board and brought it to the shop. Inspecting the convergence > board, number A10435-D004, I found fuse F3 open. None of the output > transistors are leaky or shorted. I don't have a schematic for this unit, > and have never worked on one of these conv boards. Does anyone know if there > is anything else I can look for that would cause this fuse to open, or what > circuit(s) this fuse protects? > Thanks in advance, > Corey Brazell > Audio Video Electronics > 12169 SC Hwy 121 > Newberry SC 29108 > (803) 276-9966 > > > **************************************************************************** * > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.html > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/