Keith Make sure the ground tab on the HOT heat sink is well soldered, this can cause a lot of grief. Is the intermitt switch both on buttons and remote? AL G Keith Trumbla wrote: > > RCA TV CTC-177AF3 chassis. set will come on about half of the time. B+ > during start is 140v, is this correct ? Sorry I do not have a manual at this > time. When set is powered up you can hear the relay click and the > secondaries on the FBT come up to what appears to be proper voltage,ie the > video b+ is 200 volts, then shutdown. The "standby" B+ is 147v . Have done > the tuner wrap twice and tried an EEPROM as well. > TIA > > Keith Trumbla > O/O B.E.M Electronics Inc. Est.1954 > 839 Ellice ave. > Winnipeg Manitoba, Canada R3G 0C3 > Ph.(204)775-2875 Fax(204) 774-9192 > http://www.bemelectronics.com > > _________________________________________________________________ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/