Hi All. I have this chassis in my shop. It had a broken ANT B jack. I repaired the tuner and took the chassis back and it still has a blue screen that reads "NO SIGNAL" I brought the chassis back and connected it to another 35" RCA set and I have no filaments and the screen voltage is low +80 volts. I replaced the tuner to see if I could at least get audio out of it thinking that the tube and yoke may not be the same seeing the test set has a CTC169 in it. Still no HV, filament and low screen voltage. Anyone know of this problem? Phil@Phil's Electronics 34651 Ford Road Westland, MI. 48185 734-728-5925 philstv.com - philstv(at)aol.com ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/