If there is no focus lock it will not spin.... Zap it with 12 v for a moment and see if it will spin... david stereo exchange chicago, 1-773-784-0004 http://www.turntablerepair.com/ -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of matt sherer Sent: Tuesday, February 11, 2003 7:30 PM To: techassist Subject: [TechAssist] Aiwa Stereo, M#:CX-NV2100U, CD spindle motor won't turn Aiwa Stereo Model: CX-NV2100U Spindle motor will not spin. Checked motor and connections from main board to motor board. Looking for a print to trace where the drive voltage comes from. Any help appreciated. Gear Guy Electronic repair A/V systems design, maintenance and installation AMX programming Matt Sherer, CET 1411 Honeysuckle Lane Champaign, IL 61821 (217)356-9479 m.sheer@xxxxxxxxxxxxx **************************************************************************** * Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html **************************************************************************** * For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". **************************************************************************** * ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************