[team2039] Re: Tonight
- From: Mark Amber <me@xxxxxxxxxxxx>
- To: "team2039@xxxxxxxxxxxxx" <team2039@xxxxxxxxxxxxx>
- Date: Thu, 19 Jan 2012 17:26:28 -0600
For initial testing and prototyping, just in case this will not work
for us, of you want to buy more of them at this time and don't care if
they don't work out, then just tell me, I will think about the
quantities.
- Mark Amber -
On Jan 19, 2012, at 4:20 PM, Adam Czerwonka <Adam.Czerwonka@xxxxxxxxxxxx> wrote:
> I didn't order the molex connectors yet. Are you still confident that the
> quantities are correct?
>
> -----Original Message-----
> From: team2039-bounce@xxxxxxxxxxxxx [mailto:team2039-bounce@xxxxxxxxxxxxx] On
> Behalf Of Mark Amber
> Sent: Thursday, January 19, 2012 4:15 PM
> To: Roboics Team
> Subject: [team2039] Tonight
>
> I will not be able to make it tonight, sorry for missing two in a row,
> Tuesday was too snowy and far away and I usually take Thursdays off because
> it is a bad day for school work that needs to be done. I usually would come
> on thursdays if I missed Tuesday but that is not the case since I have so
> much to do.
>
> I would like to know if all the parts are ordered, the molex XRC are the ones
> that I don't know if they were ordered yet.
>
> Is the Internet working, if not I am sorry, apparently things don't like
> working the way they were designed to, unless they are anywhere else besides
> robotics of course.
>
> I will be there tomorrow and Saturday and would like to design and hopefully
> build (on saturday) the electronics box (main one) for that, we will likely
> need access to the shop, a mentor to dedicate the day or two to that and the
> material, I would imagine we have everything in stock besides the main see
> through material. I will figure out how we will seal it later once it is
> assembled, we will just leave a gap that can be filled by something between
> the wall and the three sided casserole dish lid.
>
> To recap
> -buy molex XRC as stated in email
> -use EIGERLab (one day ours will work for good, hopefully) -Buy lid material
> (thick and clear) -find out what mentor will be available Saturday to work
> with me and a few other electrical member to build what we design on Friday
> (it is already almost completely planed -if possibly play with connectors and
> prototype wire routes
>
> - Mark Amber -
>
>
>
> ***
> The information in this email is confidential and intended solely for the
> individual or entity to whom it is addressed. If you have received this email
> in error please notify the sender by return e-mail, delete this email, and
> refrain from any disclosure or action based on the information.
> ***
>
Other related posts:
