[team2039] Re: FW: Design review for the Rockford Robotics 2011 entry
- From: Joanna <joanna.webber@xxxxxxxxxxxxx>
- To: team2039@xxxxxxxxxxxxx
- Date: Mon, 7 Feb 2011 11:22:56 -0600
I'm not going. Carolin, Eli, Ty, Jeff, and Mark are going. Mr. Cotto will be
there because he works there and maybe Adam or Shawn.
On Feb 7, 2011, at 11:15 AM, Webber, Will HS wrote:
> Make sure to get photos or video of this event!
>
> -----Original Message-----
> From: team2039-bounce@xxxxxxxxxxxxx [mailto:team2039-bounce@xxxxxxxxxxxxx] On
> Behalf Of Adam Czerwonka
> Sent: Thursday, February 03, 2011 10:23 AM
> To: 'team2039@xxxxxxxxxxxxx'
> Subject: [team2039] FW: Design review for the Rockford Robotics 2011 entry
>
> FYI... We need one student from each sub-team to help prepare for a design
> review at GE.
>
> This is a great opportunity to experience what it's like to be an engineer in
> the "hot seat", and get some ideas to help improve our robot design and
> reliability. We will complete preparation for the review on Saturday.
>
> Thanks,
> Adam
>
> -----Original Message-----
> From: Cotto, Gabriel (GE Aviation, US) [mailto:Gabriel.Cotto@xxxxxx]
> Sent: Thursday, February 03, 2011 10:15 AM
> To: Adam Czerwonka; Matt Rhoades; Mary Johnson; Jamie Early;
> ecarreguin@xxxxxxx
> Subject: FW: Design review for the Rockford Robotics 2011 entry
>
> Everyone
>
> The design review is all set. Lance Miller (Director of Engineering) has made
> all the arrangements for the robot design review.
>
> GE design review panel
> 1) Ron Downs (Manufacturing Shop Operations Manager) - Manufacturing/Assembly
> 2) Benjamin Samuels (Electrical Engineer) - Electrical Engineering
> 3) Steve Carlson (Electrical Engineer) - Electrical Engineering
> 4) Eric Johnson (Air Systems Engineer) - Mechanical Engineering
> 5) Craig Lins (Air Systems and Testing Engineering Supervisor) - Test
> Engineering
> 6) Garrett Geiseman (Quality Assurance Engineering/Control) - Quality
> 7) Lance Miller (Director of Engineering) - Engineering
>
> This design review has generated a lot of interest in all of engineering;
> more than any poster, email or any other form of robotics propaganda I have
> tried to promote here. GE Aviation has always been eager to help the robotics
> team but, because of strict company rules not allowing monetary contributions
> to an individual team, never had a good way to help out.
>
> Now on the team side, I am not sure if I have gotten the word out properly to
> the team. I sent out a broadcast message to the team last Friday, but I fear
> that the message did not get out somehow since I have not heard back from
> anyone on the team (besides Adam) about it. (There have been some problems
> here lately with both internal and external emails going out to large
> groups.) Attached is the original message.
> <<Robot Design Review at GE Aviation>> In earlier emails, I was sending
> design review updates to Adam (he's the
> boss) and Matt (he's in charge of the robot CAD drawings). This update I am
> spreading the news to a bit wider audience to ensure that others are aware of
> what is going on.
>
> My concerns are (1) no one else has heard about this, (2) we have three
> working days to prepare for this, and (3) I do not wish to take focus away
> from actual design and construction of the main robot and the mini-bot.
>
> As far as I am concerned at this point, there is no turning back. Too much
> effort has been put in by GE and too much excitement has been generated for
> me to tell them to postpone or cancel the review. We need to put something
> together, even if it is not our best, and present our robot design.
>
> Please let me know what you think. You can email, phone call, or just wait
> for tonight's meeting (I will be there).
>
> Thank you and I look forward to hearing from you.
>
> Gabriel Cotto
> Air Systems Analyst
> GE
> Aviation
> Mechanical Systems
>
> T +1 815 637 3963
> F +1 815 637 5283
> E Gabriel.Cotto@xxxxxx
> www.ge.com/aviation
>
> 1354 Clifford Avenue
> P.O. Box 2909
> Loves Park, IL 61132-2909, U.S.A.
> GE Aviation Systems LLC
>
> GE imagination at work
>
> _____________________________________________
> From: Miller, Lance (GE Aviation, US)
> Sent: Wednesday, February 02, 2011 9:10 AM
> To: Downs, Ron (GE Aviation, US); Samuels, Benjamin (GE Aviation, US);
> Carlson, Stephen (GE Aviation, US); Johnson, Eric R. (GE Aviation, US); Lins,
> Craig (GE Aviation, US); Geiseman, Garrett (GE Aviation, US); Cotto, Gabriel
> (GE Aviation, US)
> Cc: Contreras, Angel (GE Aviation); Liddle, Elliott (GE Aviation, US);
> Miller, Carlos (GE Aviation, US)
> Subject: Design review for the Rockford Robotics 2011 entry
>
> Congratulations, and thank you. You have been selected to represent your
> functional area in the GE hosted design review for the Rockford Robotics 2011
> robot. The review is planned for next Monday (Feb 7th)
> 4-6pm. The Video conference room is booked for this event however I
> expanded the review panel size and I am planning to move this to a larger
> room (T&D if available). I will update you when booked. Please take the
> opportunity to read the background and requirements information links
> provided below prior to the meeting. I have asked Gabe Cotto to provide us
> with the Robotics team's design package when it becomes available.
>
> Thanks again for volunteering your time to help the Rockford Robotics team.
>
> Lance
>
> Below are the web links to the robot requirement documents which include the
> Game Manual and the revisions or the rule updates.
> FRC Game Manual sections 2 (The Arena), 3 (The Game), and 4 (The Robot):
> http://www.usfirst.org/uploadedFiles/Robotics_Programs/FRC/Game_and_Seas
> on__Info/2011_Assets/Complete_FRC_Game_Manual_25Jan2011.pdf
> Rule updates (2 per week)
> http://www.usfirst.org/roboticsprograms/frc/content.aspx?id=450
>
>
> ______________________________________________
> From: Miller, Lance (GE Aviation, US)
> Sent: Wednesday, February 02, 2011 8:44 AM
> To: Miller, Lance (GE Aviation, US); Burie, Brad (GE Aviation, US);
> Carlson, Stephen (GE Aviation, US); Cotto, Gabriel (GE Aviation, US); Decori,
> Stephen (GE Aviation, US); Dunn, Christopher (GE Aviation, US); Fairbert,
> Mark (GE Aviation, US); Habbley, Dale (GE Aviation, US); Hext, Richard G (GE
> Aviation, US); Hightower, Peter (GE Aviation, US); Johnson, Eric R. (GE
> Aviation, US); Kintz, Larry (GE Aviation, US); Knabe, Kevin (GE Aviation,
> US); Kobayashi, Sukeyuki (GE Aviation, US); Kunde, John (GE Aviation, US);
> Kyriazopoulos, Tom (GE Aviation, US); Lins, Craig (GE Aviation, US);
> Massetti, Ron (GE Aviation, US); Mitkusevitch, Paul (GE Aviation, US);
> Muller, Jones (GE Aviation, US); Nelson, Chris (GE Aviation, US); Opificius,
> Julian (GE Aviation, US); Real, Heather (GE Aviation, US); Rose, Richard A.
> (GE Aviation, US); Samuels, Benjamin (GE Aviation, US); Schoensiegel, Nathan
> (GE Aviation, US); Shenk, Dave (GE Aviation, US); Short, John (GE Aviation,
> US); Sickler, Larry (GE Aviation, US); Sincox, Frank (GE Aviation, US);
> Stenger, Chuck (GE Aviation, US); Talbot, Colleen (GE Aviation, US); Volz,
> John (GE Aviation, US); D'Haeze, Brian (GE Aviation, US); Hallisey, Kevin (GE
> Aviation, US); McMullen, Rich (GE Aviation, US); Liddle, Elliott (GE
> Aviation, US); Downs, Ron (GE Aviation, US); Morehead, Scott (GE Aviation,
> US); Bradford, Steve (GE Aviation, US); Banjac, Gary (GE Aviation, US);
> Gomez, Jose (GE Aviation, US); Johnson, Tim V. (GE Aviation, US); Johnson,
> Scott (GE Aviation, US); Vyas, Pat (Unison, US); Lappin, Dennis (GE Aviation,
> US); Nemeth, David V (GE Aviation, US); Geiseman, Garrett (GE Aviation, US);
> Wright, Curtis (GE Aviation, US); Gable, Kevin (GE Aviation, US); McDanel,
> Don (GE Aviation, US); McClean, Renee (GE Aviation, US)
> Subject: RE: Invitation to participate in the GE Rockford hosted
> design review for the Rockford Robotics 2011
>
> Thanks to everyone who expressed interest. We have decided to enlarge the
> panel size to 7.
> Below are the review panel members selected to represent GE.
>
> GE design review panel
> 1) Ron Downs -Manufacturing/Assembly
> 2) Benjamin Samuels - Electrical Engineering
> 3) Steve Carlson - Electrical Engineering
> 4) Eric Johnson - Mechanical Engineering
> 5) Craig Lins - Test Engineering
> 6) Garrett Geiseman - Quality
> 7) Lance Miller - Engineering
>
> Lance F. Miller
> GE
> Aviation
> Director of Engineering
>
> T 815 637 3375
> F 815 877 5060
> E lance.f.miller@xxxxxx
> www.ge.com/aviation
>
> 1354 Clifford Ave
> Loves Park, IL 61132-2909
> U.S.A.
> GE Aviation Systems LLC
>
>
> _____________________________________________
> From: Miller, Lance (GE Aviation, US)
> Sent: Friday, January 28, 2011 2:05 PM
> To: Burie, Brad (GE Aviation, US); Carlson, Stephen (GE Aviation,
> US); Cotto, Gabriel (GE Aviation, US); Decori, Stephen (GE Aviation, US);
> Dunn, Christopher (GE Aviation, US); Fairbert, Mark (GE Aviation, US);
> Habbley, Dale (GE Aviation, US); Hext, Richard G (GE Aviation, US);
> Hightower, Peter (GE Aviation, US); Johnson, Eric R. (GE Aviation, US);
> Kintz, Larry (GE Aviation, US); Knabe, Kevin (GE Aviation, US); Kobayashi,
> Sukeyuki (GE Aviation, US); Kunde, John (GE Aviation, US); Kyriazopoulos, Tom
> (GE Aviation, US); Lins, Craig (GE Aviation, US); Massetti, Ron (GE Aviation,
> US); Miller, Lance (GE Aviation, US); Mitkusevitch, Paul (GE Aviation, US);
> Muller, Jones (GE Aviation, US); Nelson, Chris (GE Aviation, US); Opificius,
> Julian (GE Aviation, US); Real, Heather (GE Aviation, US); Rose, Richard A.
> (GE Aviation, US); Samuels, Benjamin (GE Aviation, US); Schoensiegel, Nathan
> (GE Aviation, US); Shenk, Dave (GE Aviation, US); Short, John (GE Aviation,
> US); Sickler, Larry (GE Aviation, US); Sincox, Frank (GE Aviation, US);
> Stenger, Chuck (GE Aviation, US); Talbot, Colleen (GE Aviation, US); Volz,
> John (GE Aviation, US); D'Haeze, Brian (GE Aviation, US); Hallisey, Kevin (GE
> Aviation, US); McMullen, Rich (GE Aviation, US); Liddle, Elliott (GE
> Aviation, US); Downs, Ron (GE Aviation, US); Morehead, Scott (GE Aviation,
> US); Bradford, Steve (GE Aviation, US); Banjac, Gary (GE Aviation, US);
> Gomez, Jose (GE Aviation, US); Johnson, Tim V. (GE Aviation, US); Johnson,
> Scott (GE Aviation, US); Vyas, Pat (Unison, US); Lappin, Dennis (GE Aviation,
> US); Nemeth, David V (GE Aviation, US); Geiseman, Garrett (GE Aviation, US);
> Wright, Curtis (GE Aviation, US); Gable, Kevin (GE Aviation, US); McDanel,
> Don (GE Aviation, US); McClean, Renee (GE Aviation, US)
> Subject: Invitation to participate in the GE Rockford hosted
> design review for the Rockford Robotics 2011
>
> I am soliciting volunteers who would like to help the local Rockford Robotics
> team review their Robot design for 2011. They are currently in the detail
> design phase of the project and would like our help conducting a design
> review. The robot must be completely built and shipped on Tuesday, February
> 22.
>
> The plan is for the Rockford Robotics team to provide us with detail robot
> requirements, CTQ's and preliminary design documentation a few days before
> the review. The review will occur on Monday Feb 8th from 4-6pm in our video
> conference room.
>
> If you are interested send me an e-mail. I will work with the senior staff
> to select approximately 5 review panel members representing multiple
> disciplines with a primary focus on engineering, quality, and manufacturing
> disciplines.
>
> Elliott, Pat, Ron, Scott, et. all, Please forward or speak to anyone I may
> have missed in your areas that you feel may be interested in helping. I
> would like several people focused on scrutinizing the robot design from a
> manufacturability, quality, and assembly perspective.
>
> Below are the web links to the robot requirement documents which include the
> Game Manual and the revisions or the rule updates.
> FRC Game Manual sections 2 (The Arena), 3 (The Game), and 4 (The Robot):
> http://www.usfirst.org/uploadedFiles/Robotics_Programs/FRC/Game_and_Seas
> on__Info/2011_Assets/Complete_FRC_Game_Manual_25Jan2011.pdf
> Rule updates (2 per week)
> http://www.usfirst.org/roboticsprograms/frc/content.aspx?id=450
>
>
>
>
> Lance F. Miller
> GE
> Aviation
> Director of Engineering
>
> T 815 637 3375
> F 815 877 5060
> E lance.f.miller@xxxxxx
> www.ge.com/aviation
>
> 1354 Clifford Ave
> Loves Park, IL 61132-2909
> U.S.A.
> GE Aviation Systems LLC
>
>
Other related posts:
