What diameter rocket is your Ram Rocket going to be? I was thinking of a 4 inch myself with a 38 or 54mm motor tube. From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of hagadornclassics@xxxxxxx Sent: Saturday, February 04, 2012 4:10 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Looking for a Estes 55 Nose Cone Larry I could check in my stuff also I think I might have a BT55 nose cone. I like that Ramjet rocket matter of fact I am working on an up scale Ramjet right now. It will be done by Dairy Aire 2012. It is turning out to be a bigger challenge than I remember but worth every minute of the tedious task. Aaron Hagadorn TRA 12178 -----Original Message----- From: gary-walker <gary-walker@xxxxxxxxxxx> To: tccrockets <tccrockets@xxxxxxxxxxxxx> Sent: Sat, Feb 4, 2012 3:53 pm Subject: [tccrockets] Re: Looking for a Estes 55 Nose Cone I'll check tomorrow. Should have one in our box-o-broken-rockets. Gary Walker _____ From: "Larry Taylor" <cvrcsoaring@xxxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Saturday, February 4, 2012 11:43:55 AM Subject: [tccrockets] Looking for a Estes 55 Nose Cone Does anyone have a Estes Nose Cone that will fit a 55 Body tube, that they could part with? I really don't want to buy a whole set of 5 nose cones just to get 1. I'm rebuilding a OLD Meteor that my son had. Out of all the Estes it was his favorite. Next project will be a Estes Ram Rocket. Larry Taylor KF6JBG KF6JBG(at)ARRL(dot)NET