You’ll recognize people who also fly at snow ranch most likely. There’s a lot
of overlap between various clubs.
Sent from my iPhone
On Jun 14, 2019, at 8:55 PM, Curtis Sojka <curtis.sojka@xxxxxxxxx> wrote:
Hi folks,
My name is Curt. I just learned about your group about a week ago. I've flown
at Snow Ranch and assumed launches in CA were over until fall. When I learned
of your existence I started working on a Madcow Sport-X for my L1. Tonight
I'm struggling through some paint issues but if you'll have me I'm planning
to make the 3 hour drive from Alameda to the launch site. Looking forward to
meeting everyone!
Curt
On Fri, Jun 14, 2019 at 6:02 PM Bruce Rohn <bhrohn@xxxxxxxxx> wrote:
Everyone remember to bring lots of cold water
On Fri, Jun 14, 2019 at 4:28 PM James Dougherty <jafrado@xxxxxxxxx> wrote:
Awesome! Thanks Bruce!!!
On Jun 14, 2019, at 4:13 PM, Bruce Rohn <bhrohn@xxxxxxxxx> wrote:
I will be there too. I have certification forms and I'm not afraid to use
them!!
The Prefect!
On Fri, Jun 14, 2019 at 11:25 AM James Dougherty <jafrado@xxxxxxxxx>
wrote:
Thanks Scott, Dale,
Looks like you're all set!
Weather looks great, and NOTAM is hot. Will see you folks in the AM
(8:30-9:00am); should be an awesome launch!!!!
-James
On Thu, Jun 13, 2019 at 12:48 PM Dale <Dale@xxxxxxxxxx> wrote:
Yes aerotech.
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of ;
dmarc-noreply@xxxxxxxxxxxxx
Sent: Thursday, June 13, 2019 11:52 AM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: June Launch - Sat 06/15
Dale
I have a 1706 casing you can borrow.. to be clear this is the Aerotech
54mm 1706ns (essentially the 4 grain case) you need correct?
You just have to promise to clean it for me when done ;)
BTW you also need to use the FEC with that casing in order to use the
K185 long burn load.. I think I read this is the load you want to use in
it? Please let me know so I bring the correct forward closure.
—Scott
On Jun 13, 2019, at 10:22 AM, Dale <Dale@xxxxxxxxxx> wrote:
Rod,
Will you have the 1706 casing for a K185 with you? If not, maybe someone
will that I can borrow for my new rocket?
Dale
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Ralovley
Sent: Thursday, June 13, 2019 9:41 AM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: June Launch - Sat 06/15
Thanks BENNY!
ROD
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: James Dougherty <jafrado@xxxxxxxxx>
Date: 6/13/19 9:28 AM (GMT-08:00)
To: TCC chat <tccrockets@xxxxxxxxxxxxx>
Subject: [tccrockets] Re: June Launch - Sat 06/15
Yes! Thank you Ben
On Thu, Jun 13, 2019 at 8:18 AM John Venable
<dmarc-noreply@xxxxxxxxxxxxx> wrote:
Just wondering if the launch is a go this weekend?
Sent from Yahoo Mail on Android
On Tue, Jun 4, 2019 at 2:44 PM, James Dougherty
<jafrado@xxxxxxxxx> wrote:
Hey Folks,
We're good to go for our June Launch on Saturday, June 15th.
Do we have any volunteers for hauling the trailer?
Thank you!
-James