[tccrockets] Re: June Launch - Sat 06/15

  • From: Curtis Sojka <curtis.sojka@xxxxxxxxx>
  • To: tccrockets@xxxxxxxxxxxxx
  • Date: Fri, 14 Jun 2019 19:55:52 -0700

Hi folks,

My name is Curt. I just learned about your group about a week ago. I've
flown at Snow Ranch and assumed launches in CA were over until fall. When I
learned of your existence I started working on a Madcow Sport-X for my L1.
Tonight I'm struggling through some paint issues but if you'll have me I'm
planning to make the 3 hour drive from Alameda to the launch site. Looking
forward to meeting everyone!

Curt

On Fri, Jun 14, 2019 at 6:02 PM Bruce Rohn <bhrohn@xxxxxxxxx> wrote:

Everyone remember to bring lots of cold water

On Fri, Jun 14, 2019 at 4:28 PM James Dougherty <jafrado@xxxxxxxxx> wrote:

Awesome! Thanks Bruce!!!


On Jun 14, 2019, at 4:13 PM, Bruce Rohn <bhrohn@xxxxxxxxx> wrote:

I will be there too. I have certification forms and I'm not afraid to use
them!!

The Prefect!

On Fri, Jun 14, 2019 at 11:25 AM James Dougherty <jafrado@xxxxxxxxx>
wrote:

Thanks Scott, Dale,
Looks like you're all set!

Weather looks great, and NOTAM is hot. Will see you folks in the AM
(8:30-9:00am); should be an awesome launch!!!!


-James


On Thu, Jun 13, 2019 at 12:48 PM Dale <Dale@xxxxxxxxxx> wrote:

Yes aerotech.





*From:* tccrockets-bounce@xxxxxxxxxxxxx [mailto:
tccrockets-bounce@xxxxxxxxxxxxx] *On Behalf Of *
dmarc-noreply@xxxxxxxxxxxxx
*Sent:* Thursday, June 13, 2019 11:52 AM
*To:* tccrockets@xxxxxxxxxxxxx
*Subject:* [tccrockets] Re: June Launch - Sat 06/15



Dale



I have a 1706 casing you can borrow.. to be clear this is the Aerotech
54mm 1706ns (essentially the 4 grain case) you need correct?



You just have to promise to clean it for me when done ;)



BTW you also need to use the FEC with that casing in order to use the
K185 long burn load.. I think I read this is the load you want to use in
it? Please let me know so I bring the correct forward closure.



—Scott





On Jun 13, 2019, at 10:22 AM, Dale <Dale@xxxxxxxxxx> wrote:



Rod,



Will you have the 1706 casing for a K185 with you? If not, maybe
someone will that I can borrow for my new rocket?



Dale



*From:* tccrockets-bounce@xxxxxxxxxxxxx [
mailto:tccrockets-bounce@xxxxxxxxxxxxx
<tccrockets-bounce@xxxxxxxxxxxxx>] *On Behalf Of *Ralovley
*Sent:* Thursday, June 13, 2019 9:41 AM
*To:* tccrockets@xxxxxxxxxxxxx
*Subject:* [tccrockets] Re: June Launch - Sat 06/15



Thanks BENNY!



ROD







Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------

From: James Dougherty <jafrado@xxxxxxxxx>

Date: 6/13/19 9:28 AM (GMT-08:00)

To: TCC chat <tccrockets@xxxxxxxxxxxxx>

Subject: [tccrockets] Re: June Launch - Sat 06/15



Yes! Thank you Ben





On Thu, Jun 13, 2019 at 8:18 AM John Venable <
dmarc-noreply@xxxxxxxxxxxxx> wrote:

Just wondering if the launch is a go this weekend?

Sent from Yahoo Mail on Android
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>



On Tue, Jun 4, 2019 at 2:44 PM, James Dougherty

<jafrado@xxxxxxxxx> wrote:

Hey Folks,



We're good to go for our June Launch on Saturday, June 15th.

Do we have any volunteers for hauling the trailer?

Thank you!

-James






Other related posts: