[tccrockets] Re: Cleaning Party - Saturday March 21st

  • From: "Rob Diehl" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "rwdiehl" for DMARC)
  • To: tccrockets@xxxxxxxxxxxxx
  • Date: Fri, 13 Mar 2020 17:58:07 -0700

That was close.  I wouldn’t want to show up on the wrong day and see Ben in his 
underwear. 

Sent from my iPhone

On Mar 13, 2020, at 5:54 PM, Ben Sandoval <hdbenstereo@xxxxxxxxx> wrote:


it's the 21st

On Fri, Mar 13, 2020 at 5:33 PM Rob Diehl <dmarc-noreply@xxxxxxxxxxxxx> 
wrote:
Is it tomorrow or 21st?  

Email says both. 

Thanks. 



Sent from my iPhone

On Mar 8, 2020, at 8:39 AM, James Dougherty <jafrado@xxxxxxxxx> wrote:


Hi Folks,

It's time for our annual cleaning and system check!
The address is:

Ben Sandoval
32099 Rd 122
Visalia, CA 93291
559 805-3441

https://www.google.com/maps/place/32099+Rd+122,+Visalia,+CA+93291/@36.3712057,-119.3061828,17.25z/data=!4m5!3m4!1s0x809525ca57688a9f:0x8752a0a4778260e4!8m2!3d36.371433!4d-119.30403


Saturday March 14th at 9am we will meet there and get the gear ready for 
our April launch. We should be done by 3PM or so. 

High Level Plan

- Overhaul all of the launch leads (new Gator clips, leads, etc)
- Test launch system, charge batteries
- Service any pads, clean all rails
- Go through tool-boxes, all items in trailer, organize
- Fix dollys (need to fill tires with foam)
- Check Audio, Check PA, make sure all is well
- Service Generator
- Remove a few Ring Mounts on the floor of the new trailer
- Add new racks in trailer for rods/rails and storage
- Cotter Pins for Away pad (Harbor freight)
- Eat a great lunch (Ben will send details but we'll be very WELL fed)

I'm hoping if we have 10-15 people we can get through most of the work
in the morning, eat lunch and then hang out, do show and tell, build
stuff, etc. 


Things to Bring
- Alumibrite
- Foam for Tires 
- White Vinegar
- Towels
- Gloves
- Pressure Washer
- Welder

Note: We may make a trip to Harbor Freight or local HW store to get things
if needed.

Things I Will Bring
- Soldering iron/flux/solder
- Connectors
- Wire
- Blowtorch
- Electrical connectors, wire & rework tools

Needed
- Someone to haul Trailer
- Volunteer to help with Soldering
- Volunteer for High pressure sprayer
- Volunteer for help with Welding
- As many hands as possible!

Checklist is below; really looking forward to seeing everyon at Bens
to get our launch gear in tip-top shape for DairyAire and OS!

Thank you everyone!!!

-James



CHECKLIST
/* snip */

Trailer
- Empty out, sweep, use compressed air to clean it
- Open up all tables and put boxes on it
- Open boxes and make sure all is sorted properly and matches label
- Clean out trash
- Take out launch system
- Hookup all relays for launch system - check batteries and relay
- Remove ring mounts on floor
- Weld some brackets and install them to hang rails/rods

Launch Gear
- New Cotter pins and straps for away pads (one of the legs fell on someone)
- Fix Broken turnbuckle on one of the Quadpods
- The tires on the carts & dollys need to be patched, inflated, and foamed
- We probably need a new dolly for the batteries
- New Hangers for signs (we can adapt some of the gear we have with a 
Welder)
- Pack Everything in the right box
- Put back in Trailer

Launch Rods/Rails

- All of the rods, pads and rails need to have a bath in :

  #1 - White Vinegar - scrub as needed with a scrub-brush
  #2 - Alumibrite - spray on, let it sit
  #3 - pressure wash (2000 psi or more)

Follow up with grease/WD40 for all threads/rods/fittings, etc
This one takes the most time and where we can really use all the extra
help - anyone who has seen our hardware knows we like everything
squeaky clean.

Launch system
- We need to charge all the batteries.
- We will review the Igniter leads, replace all of the 
- ones which are bad.

Harbor Freight
- A new Cart for batteries
- New Fire extinguisher (x2)
- Cotter Pin for Away pad

Other Items
- New Rails (Gary and James - TBD)

On Sun, Mar 8, 2020 at 8:37 AM James Dougherty <jafrado@xxxxxxxxx> wrote:
Sorry Steve and Bruce you can't make it :(


On Fri, Mar 6, 2020 at 9:13 AM Dale Soutas <dale@xxxxxxxxxx> wrote:
Ben, I lost your contact info please send to me. Dale

Get Outlook for Android

From: tccrockets-bounce@xxxxxxxxxxxxx <tccrockets-bounce@xxxxxxxxxxxxx> 
on behalf of Bruce Rohn <bhrohn@xxxxxxxxx>
Sent: Friday, March 6, 2020 7:51:32 AM
To: tccrockets@xxxxxxxxxxxxx <tccrockets@xxxxxxxxxxxxx>
Subject: [tccrockets] Re: Cleaning Party - Saturday March 21st
 
I'm sorry I can't make the cleaning party, I will be out of town that 
day. I will see you folks in April.

On Tuesday, March 3, 2020, James Dougherty <jafrado@xxxxxxxxx> wrote:
Hey Folks,

We're having the Annual Cleaning Party Saturday March 21st at Ben 
Sandoval's place.
Thanks everyone for your support, we'll get everything tip-top, test it 
in April and be ready
to rock for DairyAire!

Please mark the date, we will send more details in the next week.

Best regards
-James

James Dougherty
TRA #11425 L3 TAP
President, Tripoli Central California (Prefecture # 52)
http://www.tccrockets.com/
TRA Records Committee Chair
http://www.tripoli.org/
408-476-7391



Disclaimer

The information contained in this communication from the sender is 
confidential. It is intended solely for use by the recipient and others 
authorized to receive it. If you are not the recipient, you are hereby 
notified that any disclosure, copying, distribution or taking action in 
relation of the contents of this information is strictly prohibited and 
may be unlawful.

This email has been scanned for viruses and malware, and may have been 
automatically archived by Mimecast Ltd, an innovator in Software as a 
Service (SaaS) for business. Providing a safer and more useful place for 
your human generated data. Specializing in; Security, archiving and 
compliance. To find out more Click Here.

Other related posts: