People never account for their time, and the amount of time you spend will
outdo any costs on materials you use.
Lets bill Marino or Atteberry out for $200/hr for cad/blue-prints and time
a variable. One hour of their time is worth more than the glue. moot point
so, it is all relative. The amount of time spent on those killer fins, I
wouldn't use anything other than the best out there and I would not want
detachment.
The best glue I have seen or used so far (besides Cotronics 4525) for
general Fiberglass and Aluminum (AL) AL-AL or AL-CF is the 3M DP420NS -
Deep Penetrating 420 No-Sag. This stuff is amazing. It is thixotropic when
you apply it! Yes, that's right, it comes out as Black toothpaste and can
be applied upside down. Claims 2hrs, but varies with temp and humidity
(seen 4 and always let dry overnight regardless). Scott Yow and I recently
did the Avalanches with it as well as some of my own bond testing for a
motor project with G-Man
The applicator gun is the best part - expensive, but is stronger than any
caulking gun (like you use for the West 610 Gel) and delivers and accurate
and perfect mix
to the wand. It is the ultimate delivery system.
Glue - http://dragonplate.com/ecart/product.asp?pID=4893&cID=325
Gun - https://dragonplate.com/ecart/product.asp?pID=4894&cID=325
Applicator Tip - https://dragonplate.com/ecart/product.asp?pID=4895&cID=325
I just got another tube yesterday :-)
On Tue, Jun 12, 2018 at 7:01 PM, <srkendal@xxxxxxxxxxx> wrote:
Yeah, I'm sure they have something, but can you afford it is the other
part of that question.
Steve
Sent from XFINITY Connect Application
-----Original Message-----
From: jafrado@xxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx
Cc: gary-walker@xxxxxxxxxxx, chrisattebery1971@xxxxxxxxx
Sent: 2018-06-12 6:56:55 PM
Subject: [tccrockets] Re: Anyone have a CTI M2245 (75 6XL) reload that
they would be willing to sell?
Cotronics will not bond Al-Al. The peel strength is not there even if you
do the sanding while applicating to removed oxides.
On Tue, Jun 12, 2018 at 6:40 PM, <srkendal@xxxxxxxxxxx> wrote:
Dude... That is fantastic. Cotronics epoxy for those fins? That casing's
gonna get hot, ya know? 🚀
-Steve
Sent from XFINITY Connect Application
-----Original Message-----
From: gary-walker@xxxxxxxxxxx
To: tccrockets@xxxxxxxxxxxxx, chrisattebery1971@xxxxxxxxx
Sent: 2018-06-12 3:56:02 PM
Subject: [tccrockets] Re: Anyone have a CTI M2245 (75 6XL) reload that
they would be willing to sell?
SWEET!! Beautiful work Chris! Can't wait to hear the results!
Gary Walker
Tripoli Central CA
TRA # 9273 - L3
On June 12, 2018 at 3:41 PM Chris Attebery <chrisattebery1971@xxxxxxxxx>
wrote:
I'm attempting to break the existing M altitude record. Nic Lottering hit
45,554' in 2016 with a rocket that weighed about 7.5lbs without the motor.
I looked at every aspect of his rocket and I think I can beat the record.
My rocket will be considered a research project because I am modifying or
replacing parts of the motor casing, but I'll be using the reload as
provided.
For those of you who haven't seen my thread on Rocketry Forum here are
the pieces of my rocket.
Fins will be bonded directly to the motor case:
[image: IMG_5696.jpg]
James Marino and I modified a stock CTI rear closure to add a efficient
boat tail.
[image: IMG_5703.jpg]
I'll be using the altimeter/camera bay that I built for my 75mm carbon
fiber M685 project last year (37,785'). I had to cut down a nose cone and
join a coupler to it because this project will truly be minimum diameter.
[image: IMG_5719.jpg]
[image: IMG_5717.jpg]
Wish me luck. It's going to be awesome one way or another. LOL!
On Tue, Jun 12, 2018 at 3:26 PM Chris Attebery <
chrisattebery1971@xxxxxxxxx> wrote:
I'm attempting to break the existing M altitude record. Nic Lottering hit
45,554' in 2016 with a rocket that weighed about 7.5lbs without the motor.
I looked at every aspect of his rocket and I think I can beat the record.
My rocket will be considered a research project because I am modifying or
replacing parts of the motor casing, but I'll be using the reload as
provided.
On Tue, Jun 12, 2018 at 3:12 PM mtnbikrmax1@xxxxxxxxxxxxx <
dmarc-noreply@xxxxxxxxxxxxx> wrote:
Going for Space Chris?
Sent from Yahoo Mail on Android
<https://overview.mail.yahoo.com/mobile/?.src=Android>
On Tue, Jun 12, 2018 at 15:10, Chris Attebery
<chrisattebery1971@xxxxxxxxx> wrote:
Well apparently AMW has them in stock. Now I'm slapping myself for not
asking them at LDRS.
On Tue, Jun 12, 2018 at 2:27 PM Chris Attebery <
chrisattebery1971@xxxxxxxxx> wrote:
Hello,
I'm looking for an M2245 reload for XPRS in September. I have a minimum
diameter project that I designed around this motor. Unfortunately it looks
like they aren't available from CTI and they are not sure when they will be
back in stock.
Anyone out there have one they'd be willing to sell to me?
Thanks,
Chris Attebery
TRA 6602 L3
