[tccrockets] Re: Altimeter Switch
- From: "Larry Taylor" <cvrcsoaring@xxxxxxxxxxxxx>
- To: <tccrockets@xxxxxxxxxxxxx>
- Date: Tue, 28 Feb 2012 23:45:11 -0800
I won't be at the next launch so I'll call and order it tomorrow. Thanks
Jack !!
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
Sent: Tuesday, February 28, 2012 11:12 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Altimeter Switch
Ok am I waiting until next launch or shipping
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Larry Taylor
Sent: Tuesday, February 28, 2012 11:05 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Altimeter Switch
Jack I want 4 of them! I'll try and make them work.
I can't find the ones that had just the screw showing and wires coming out
the back. They would fit the tube better.
Larry Taylor kf6jbg@xxxxxxx
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
Sent: Tuesday, February 28, 2012 10:38 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Altimeter Switch
I have the featherweight screw switches, Jack
Description:
http://www.featherweightaltimeters.com/images/three_switches_med.jpg
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Larry Taylor
Sent: Tuesday, February 28, 2012 10:35 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Altimeter Switch
Anyone have a few screw type altimeter arming switches for sell?
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
Sent: Tuesday, February 28, 2012 9:58 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
Cool, yes I would use the Aeropack Retainer very clean and trustworth and
convenient and I have the key switches in stock always, Altimeter If you
want down and dirty I like the Perfect Flite Stratologger they are $79.95
and pretty reliable, also go to my website and check out my new thrust
plates they are MilSpec anodized aluminum and have the Aeropack bolt hole
pattern pre-tapped already so you just screw it in and if your bird ever
crashes then unscrew and take with you and lastly check out my new MilSpec
rail buttons in both sizes ¼? and 5/16? that shit is Boss Hog
Description: SCP Thrust Plate 5.5Description: Series 15 Airfoil Rail Guides
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
Sent: Tuesday, February 28, 2012 9:49 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
Sounds fine to me.
I've been going over the DX3's stuff and it all looks quality to me. I will
be making a few mods on the nose cone, but otherwise, it's pretty good
stock. I'll need a couple of those key switches. I may be in the market
for a new altimeter. I don't need any of the special bells and whistles,
but want a quality unit that is highly reliable. Suggestions? Also, since
I'm using the 3/8" eye bolt for drogue anchor, is a special aft retainer as
important? It would look cleaner if I use one of Aerotech's jobs I
guess.....
RK
----- Original Message -----
From: Jack Garibaldi <mailto:jackgaribaldi@xxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, February 28, 2012 9:38 PM
Subject: [tccrockets] Re: DA
Hey Richard
I bought the lanyards and holders it came to $115.20 I also
had the launch money from last month that was $110.00 so I will snag a few
lanyards and call it even so I don?t have to write the club a check then you
write me a check and we can sale them so the club makes a little bit of
money. I got 300 of the lanyards that go around your neck and 100 holders so
if you want to just punch your card you can do that or you can get a holder
to put it in. Ok that is off my list to do
Jack G
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
Sent: Tuesday, February 28, 2012 9:27 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
Yeah. Last year I basically doubled the pre-orders. I can certainly get
much closer this year. The surprise was all the XXL. I think there were 2
pre ordered and I got 2 extra. I could have sold 10.
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Richard King
Sent: Tuesday, February 28, 2012 9:24 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: DA
There will always be people that want a shirt. I always get one or
two...... We had too many small sized last year and could have used a few
more XXL as you stated. I think we have the numbers dialed in?
RK
----- Original Message -----
From: Rob Diehl <mailto:rwdiehl@xxxxxxxxxxxxx>
To: tccrockets@xxxxxxxxxxxxx
Sent: Tuesday, February 28, 2012 9:09 PM
Subject: [tccrockets] DA
Want t-shirts again?
I can start looking for artwork if we want to do them again.
This year I will order more XXL and fewer small sizes. Our group seems to
be expanding if you know what I mean?
Rob
Other related posts:
