Charlie,
That’s good.
Maybe you can bring me some SU motors.
What ones are popular?
Robert DeHate
AMW/ProX
From: tccrockets-bounce@xxxxxxxxxxxxx <tccrockets-bounce@xxxxxxxxxxxxx> On
Behalf Of Charlie Savoie
Sent: Monday, October 7, 2019 11:43 AM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: AMW
You do need to worry about date codes especially on those 38mm single grainers.
😉
L1000s have been working fine for years, don’t let the peanut gallery fool you.
If you have any questions or concerns we will be onsite to help with any issues
you may have.
On Oct 6, 2019, at 7:51 PM, Robert DeHate <robert@xxxxxxxxxxx
<mailto:robert@xxxxxxxxxxx> > wrote:
Toby,
With the thousands of pounds of fresh out of the mixer propellant, no need to
worry about date codes.
You can have no worries about our CTI motors.
I am sure we can set you up with a motor you will be very happy with.
Looking forward to hanging out. Its been awhile.
Gloria
From: tccrockets-bounce@xxxxxxxxxxxxx <mailto:tccrockets-bounce@xxxxxxxxxxxxx>
<tccrockets-bounce@xxxxxxxxxxxxx <mailto:tccrockets-bounce@xxxxxxxxxxxxx> > On
Behalf Of James Dougherty
Sent: Sunday, October 6, 2019 6:31 PM
To: TCC chat <tccrockets@xxxxxxxxxxxxx <mailto:tccrockets@xxxxxxxxxxxxx> >
Subject: [tccrockets] Re: AMW
Hi Chris, save that for your next steps ... I'd like to see you fly that L1000
:-)
Besides, please check the date code, hopefully this is not one of the recalled
motors ...
L1000W DMS Notice
Make sure you check with Aerotech, they will be at the launch.
3/24/15
Dear AeroTech Dealers and Customers,
This notice is to inform you of an issue with the L1000W DMS motor. We
have been made aware of a small number of case failures with early
release lot numbers. Even though we have fired over 20 motors in development
and QC testing without incident, we are issuing this notice as a precautionary
measure.
RCS requests that the following L1000W DMS motors with the following lot
numbers not be flown or sold. All motors are from the time period of
6/12/14 through 9/22/14 and do not include motors manufactured after
10/27/14.The lot codes are as follows: 101064,101074,102574,102974,102584,
102884,102294.
Some of you might wonder why it takes so long for a notice like this to
be issued. First it takes time for a motor to enter circulation, secondly
flyers seem to wait before flying them, thirdly news of a Cato starts out
as a rumor before it finally hits my desk.
We continually monitor motor reliability (especially new ones) for issues
developing in the field, many motor manufacturing processes are adjusted
for safety and conformance without much fanfare. Occasionally motors like
the L1000W make a bigger splash due to their size, new construction, and
power. We have now developed a modification for the L1000W which we
believe will improve its reliability. We expect to resume production and
shipment of the L1000W in the near future.
We will replace any motor affected by this memo. Dealers are asked to
inventory their stock and advise us of any motors they might have covered
by this notice. Additionally customers possessing any of the above listed
motor(s) are asked first to contact their respective dealer for
replacement, if that is not convenient then they can contact us directly.
We are sorry for any inconvenience this may have caused for our dealers
and their customers, we thank you for your continued support.
Best regards,
Karl Baumann
Operations Director
RCS RMC, Inc.
Cedar City, Utah
On Sun, Oct 6, 2019 at 5:17 PM Chris Uffelman <chrisuffelman1@xxxxxxxxx
<mailto:chrisuffelman1@xxxxxxxxx> > wrote:
Hi Toby! I have a single use 54mm L1000 that I'm not using. I'd be willing to
part with it for a reasonable price.
Chris Uffelman
Sacramento
On Sun, Oct 6, 2019, 4:27 PM Toby Vanderbeek <tobyvanderbeek@xxxxxxxxx
<mailto:tobyvanderbeek@xxxxxxxxx> > wrote:
Hi Robert,
I'll be at October Skies for all three days. Looking forward to hanging out
with you. I'll finally be launching my 5.5" White Wolf, on a K550 for the
maiden voyage. Then maybe I'll launch it on an L. I prefer Aerotech reloads but
L1000 is single use. Do you have that motor?
On Sat, Oct 5, 2019 at 10:07 AM Robert DeHate <robert@xxxxxxxxxxx
<mailto:robert@xxxxxxxxxxx> > wrote:
Hello TCC!
AMW has a few exciting offers for Oct Skies.
For those of you that did not get to view our Warehouse of CTI motors out at
BALLS. “See attached”
Let me fill you in! We received 2,500lbs of Fresh new propellant.
If there is a specific motor you are wanting, get your orders in. We have every
motor in stock.
We cannot bring it all, so preorder to ensure you get the motor you want.
For those of you that preorder any Level 3 motor, you will get to join us for a
complimentary Steak Dinner on Saturday evening.
Through the event, purchases over a hundred will receive a free AMW T-Shirt,
while they last.
Also, with every purchase (1 per customer) receive a raffle ticket to win an
AMW Gift Card.
When the range closes there will be a blender going! “For those of you who
enjoy an adult beverage”
We will also have other exciting offers so be sure to stop by.
Fun for all. Even Temp Tattoos, and stickers of the colorful AMW Animals for
the kids.
Looking forward to a great enjoyable Event!
Any questions please feel free to contact us.
Robert and Gloria
603-566-2904
<image001.jpg>
--
Regards,
Toby Vanderbeek
tobyvanderbeek@xxxxxxxxx <mailto:tobyvanderbeek@xxxxxxxxx>
