[tccrockets] Re: AMW

  • From: James Dougherty <jafrado@xxxxxxxxx>
  • To: tccrockets@xxxxxxxxxxxxx
  • Date: Mon, 7 Oct 2019 08:16:29 -0700

Thanks

Maybe you can start a new thread too instead of hijacking this one ....

Subject “ L1000 for Sale”

On Oct 6, 2019, at 6:53 PM, Chris Uffelman <chrisuffelman1@xxxxxxxxx> wrote:

I just emailed Aerotech about this, so hopefully I will hear back soon.


                                                    Chris

On Sun, Oct 6, 2019, 6:31 PM James Dougherty <jafrado@xxxxxxxxx> wrote:
Hi Chris, save that for your next steps ... I'd like to see you fly that 
L1000 :-)

Besides, please check the date code, hopefully this is not one of the 
recalled motors ...
L1000W DMS Notice 

Make sure you check with Aerotech, they will be at the launch.



3/24/15 

Dear AeroTech Dealers and Customers, 

This notice is to inform you of an issue with the L1000W DMS motor. We 
have been made aware of a small number of case failures with early 
release lot numbers. Even though we have fired over 20 motors in development 
and QC testing without incident, we are issuing this notice as a 
precautionary measure. 

RCS requests that the following L1000W DMS motors with the following lot 
numbers not be flown or sold. All motors are from the time period of 
6/12/14 through 9/22/14 and do not include motors manufactured after 
10/27/14.The lot codes are as follows: 101064,101074,102574,102974,102584, 
102884,102294. 

Some of you might wonder why it takes so long for a notice like this to 
be issued. First it takes time for a motor to enter circulation, secondly 
flyers seem to wait before flying them, thirdly news of a Cato starts out 
as a rumor before it finally hits my desk. 

We continually monitor motor reliability (especially new ones) for issues 
developing in the field, many motor manufacturing processes are adjusted 
for safety and conformance without much fanfare. Occasionally motors like 
the L1000W make a bigger splash due to their size, new construction, and 
power. We have now developed a modification for the L1000W which we 
believe will improve its reliability. We expect to resume production and 
shipment of the L1000W in the near future. 

We will replace any motor affected by this memo. Dealers are asked to 
inventory their stock and advise us of any motors they might have covered 
by this notice. Additionally customers possessing any of the above listed 
motor(s) are asked first to contact their respective dealer for 
replacement, if that is not convenient then they can contact us directly. 
We are sorry for any inconvenience this may have caused for our dealers 
and their customers, we thank you for your continued support. 

Best regards, 

Karl Baumann 
Operations Director 
RCS RMC, Inc. 
Cedar City, Utah 


On Sun, Oct 6, 2019 at 5:17 PM Chris Uffelman <chrisuffelman1@xxxxxxxxx> 
wrote:
Hi Toby! I have a single use 54mm L1000 that I'm not using. I'd be willing 
to part with it for a reasonable price.



                                         Chris Uffelman
                                         Sacramento

On Sun, Oct 6, 2019, 4:27 PM Toby Vanderbeek <tobyvanderbeek@xxxxxxxxx> 
wrote:
Hi Robert,

I'll be at October Skies for all three days. Looking forward to hanging 
out with you. I'll finally be launching my 5.5" White Wolf, on a K550 for 
the maiden voyage. Then maybe I'll launch it on an L. I prefer Aerotech 
reloads but L1000 is single use. Do you have that motor?

On Sat, Oct 5, 2019 at 10:07 AM Robert DeHate <robert@xxxxxxxxxxx> wrote:
Hello TCC!

AMW has a few exciting offers for Oct Skies.

For those of you that did not get to view our Warehouse of CTI motors out 
at BALLS. “See attached”

Let me fill you in! We received 2,500lbs of Fresh new propellant.

If there is a specific motor you are wanting, get your orders in. We have 
every motor in stock.

We cannot bring it all, so preorder to ensure you get the motor you want.

For those of you that preorder any Level 3 motor, you will get to join us 
for a complimentary Steak Dinner on Saturday evening.

Through the event, purchases over a hundred will receive a free AMW 
T-Shirt, while they last.

Also, with every purchase (1 per customer) receive a raffle ticket to win 
an AMW Gift Card.

When the range closes there will be a blender going! “For those of you 
who enjoy an adult beverage”

We will also have other exciting offers so be sure to stop by.

Fun for all. Even Temp Tattoos, and stickers of the colorful AMW Animals 
for the kids.

Looking forward to a great enjoyable Event!

Any questions please feel free to contact us.

Robert and Gloria

603-566-2904



 

 

 

 

 

-- 

Regards,

Toby Vanderbeek
tobyvanderbeek@xxxxxxxxx

Other related posts: